Got a tech tip for Voyager 12's from your personal experiences, or one complete with pictures and instructions, here's where to post it. You can also ask about tips or procedures here.
Well, once the cable holding bracket broke pff the carbs i contacted carl leo.another $250 ,forr carbs.very reasonable price. BUT, enough is enough....
I had a broken cable on the original cruise box on my 93. I bought one with intact parts allegedly from an 87. The cable no matter how is routed is a...
Last post
I would suggest contacting Carl Leo, found on this site. He will likely have the parts you need. Cheers!
whats the best way to change fuel filter on a 1994 voyager . have looked didnt see much. thanks.
Last post
I change mine every winter season along with a lot of other maintenance I’m sure nobody does but that’s me. Not hard. I change my coolant at the same...
Figured I would make a headlight guard. I know the headlights are not expensive to replace IF you can find one. A friend of mine, gave me a piece of...
Last post
It should be noted that I live at 5k feet Nevada desert. Polycarbonate can and will absorb water in the air in humid climates when heated. So if you...
I havent looked in years. But a company called plastex used to make repair kits. They had a wonderful video you can watch for free. All those broken...
Last post
My Kawasaki is a tie-wrap queen,
She's held together no bolts to be seen
I don't know how she don't fall apart
Oops lost another screw over here
I was just reading the Owner's Manual and had to laugh at one statement in it in regards to what air pressure I should be running. The standard air...
Last post
I use the same small volume air pump with gauge shown earlier. Picked it up at my local Harley dealer. Works great. I've been running 8 in front and...
I bought an inexpensive Tire Pressure Monitoring System (TPMS) off of e-Bay, around two years ago. The sensor batteries, mounted on the valve stems,...
Last post
Did the 2nd sensor battery replacement earlier today. Easy-peasy, lickety-splickety. That Retaining Clip Pliers is superb! The amount of torque...
I'll be changing the plugs out on my '86 tomorrow. Are there any special tools needed to help out? I have ratchets/extension/original plug socket etc...
Last post
You can still get to them from the carburetor side.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
No unread posts No unread posts No unread posts [ Popular ] No unread posts [ Popular ] No unread posts [ Locked ] No unread posts [ Locked ]
Announce Announcement Sticky Sticky Moved topic Moved topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum