Source for Throttle and Clutch Cables

This is for general posts and questions concerning only the Voyager 1300 Six-Cylinder.

Moderators: the2knights, Highway Rider

Post Reply
User avatar
Van Voyager
Grand Tourer
Grand Tourer
Posts: 430
Joined: Wed Aug 30, 2017 8:01 am
6
Current bike(s): 1986 Kawasaki ZN1300 Voyager
Has liked: 43 times
Been liked: 37 times

Source for Throttle and Clutch Cables

Post by Van Voyager »

(I seem to be monopolizing the board :oops:)

Anyone know if Clutch and Throttle cables are available for an 86 ZN1300? I assume all models of ZN share the same cables? Also assuming new OEM cables are no longer avaible (with the exception of the odd set on Ebay). Is the only option Motion Pro?
User avatar
Lucasind
King of the Road
King of the Road
Posts: 1789
Joined: Mon Dec 17, 2012 5:44 pm
11
Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts !
Location: Toledo, OH
Has liked: 180 times
Been liked: 69 times

Re: Source for Throttle and Clutch Cables

Post by Lucasind »

http://www.ebay.com/itm/NOS-Kawasaki-Ca ... sW&vxp=mtr



There are currently more new one ....and used ones on ebay than you could use in a lifetime ! :gig:
90% OF ANY JOB ...IS GETTING STARTED !
User avatar
trikebldr
Elite Tourer
Elite Tourer
Posts: 749
Joined: Mon Sep 15, 2014 8:34 pm
9
Current bike(s): '82 Kawasaki KZ750 Spectre
'82 Kawasaki KZ1100D Spectre
'84 Kawasaki Voyager 1300 with
'79 Vetter Terraplane sidecar
'85 Kawasaki Voyager 1300
2001 Kawasaki ZG1200 Voyager XII
Location: Independence, MO.
Has liked: 0
Been liked: 1 time

Re: Source for Throttle and Clutch Cables

Post by trikebldr »

The later models have cruise control and use different throttle cables than non-cruise models. I thought the '86 model year was when they started adding cruise control, but maybe not.
User avatar
Van Voyager
Grand Tourer
Grand Tourer
Posts: 430
Joined: Wed Aug 30, 2017 8:01 am
6
Current bike(s): 1986 Kawasaki ZN1300 Voyager
Has liked: 43 times
Been liked: 37 times

Re: Source for Throttle and Clutch Cables

Post by Van Voyager »

I believe crusie was added in 87 & 88 models, no?

On a related question, it is possible to retrofit a factory cruise to a model that didn't come with it. I know the instrument cluster is slightly different (Cruise indicator), there's some kind of servo, some handlebar switches, different cables, different wiring harness.... Is the ECU different or are the cruise 'smarts' self contained?
User avatar
Me Again
King of the Road
King of the Road
Posts: 1747
Joined: Sun Feb 24, 2008 4:27 am
16
Current bike(s): 1988 1300 Voyager
Location: Wisconsin
Has liked: 0
Been liked: 218 times

Re: Source for Throttle and Clutch Cables

Post by Me Again »

I am sure it would be possible to retrofit one but probably much easier to install a universal one .
I put one for an 80's ford in my first 1300 and have one sitting here awaiting installation now .
my problem is that my joints will not allow me to reach around and hook up some of the cables and wires needed ,so it may never get done .
The one I used tied into a coil and worked flawlessly .
Post Reply

Return to “General - Voyager 1300 Six”