water in oil
Moderators: the2knights, Highway Rider
-
gunshot
- Newbie
- Posts: 2
- Joined: Sat Dec 14, 2013 1:14 am
- 10
- Current bike(s): 2013 vulcan voyager,2009 bmw 1200lt 1996 gl1500
- Has liked: 0
- Been liked: 0
water in oil
Hello to everyone, new member and new owner of a 1988 zn1300 voyager,the bike has been sitting for about six months and started about onetime a week,when I changed the oil it looks like it has water in it is there anywhere it can get water besides a head gasket TKS
-
Ozymandias
- Cruiser
- Posts: 40
- Joined: Sat May 24, 2014 12:48 am
- 9
- Current bike(s): 2010 Kawasaki 1700 Voyager
- Location: Nebraska
- Has liked: 1 time
- Been liked: 0
Re: water in oil
If you were starting it once a week, unless everything came up to full operating temperature for a reasonable period of time, I would say that ordinary condensation is probably the culprit. As asked above: is it water or antifreeze?
1975 Goldwing (found a good home for it)
2003 Nomad 1500 (traded for the Voyager)
2010 Voyager 1700
2003 Nomad 1500 (traded for the Voyager)
2010 Voyager 1700
-
Me Again
- King of the Road
- Posts: 1748
- Joined: Sun Feb 24, 2008 4:27 am
- 16
- Current bike(s): 1988 1300 Voyager
- Location: Wisconsin
- Has liked: 0
- Been liked: 220 times
Re: water in oil
That was my thought also.Ozymandias wrote:If you were starting it once a week, unless everything came up to full operating temperature for a reasonable period of time, I would say that ordinary condensation is probably the culprit. As asked above: is it water or antifreeze?
-
gunshot
- Newbie
- Posts: 2
- Joined: Sat Dec 14, 2013 1:14 am
- 10
- Current bike(s): 2013 vulcan voyager,2009 bmw 1200lt 1996 gl1500
- Has liked: 0
- Been liked: 0
Re: water in oil
Looks like water to me, condensation on the sight glass and when I drain the oil the first half pint is milky. TKS
-
Rick near Kansas city
- Cruiser
- Posts: 64
- Joined: Mon Feb 18, 2008 1:09 am
- 16
- Current bike(s): 2003 VOYAGER XII
- Location: Missouri
- Has liked: 0
- Been liked: 0
Re: water in oil
Take a look at the hose that comes off the back of the secondary air box. It goes to the motor and if it is off and you wash the bike water could get in that way.