dARKSIDE

This is for general posts and questions concerning only the Voyager XII (1200cc, Four-cylinder) Years 1986 thru 2003.

Moderators: the2knights, Highway Rider

Post Reply
User avatar
Lucasind
King of the Road
King of the Road
Posts: 1790
Joined: Mon Dec 17, 2012 5:44 pm
11
Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts !
Location: Toledo, OH
Has liked: 191 times
Been liked: 69 times

Re: dARKSIDE

Post by Lucasind »

I had the wal-mart webpage for the Nexen printed out and in hand when I walked into the automotive dept of our local store, They ordered the tire,and called a couple of days later saying the tire had come in and I could pick it up, for $59, I drove over there the next day and one of the employees told me there was a problem,no one (including 2 managers)could ring out the sale of the tire...cause "it did not exist" in the store's system,even though we were holding it in our hands ! I was told to come back the next day,and they would have this sorted out, I expressed my dis-approval :dm:
Long story short,the manager apologized , and took $10 bucks off the price for my in convenience,
New rear tire for $49 works for me ! I have 600 miles on it now, and have increased my tire pressure from 35 to 38 to 40 to 42...and that seems to be the "sweet spot" for my bike and riding condition (was experiencing sidewall flex at lower pressure as mentioned) So far ...so good with the Nexen rear...and Dunlop E III front, tire combination.........................tony :-D
90% OF ANY JOB ...IS GETTING STARTED !
User avatar
kjsett
Grand Tourer
Grand Tourer
Posts: 396
Joined: Mon Jan 16, 2012 5:28 pm
12
Current bike(s): 2003 Kawasaki Voyager XII
2009 Suzuki Vstrom DL650
Location: Ogden Utah
Has liked: 0
Been liked: 1 time

Re: dARKSIDE

Post by kjsett »

Hi All, out here i appear to be alone in my area (Phoenix) so don't have anyone to visit with (maybe Tucson, but responsibilities keeps me around here except when very hot). Anyway, that said:
I decided due to lack of local knowledge that staying with E3's was in my best interest (although I am considering Michelin Commanders II's for my next change). But one thing they don't like is gravel. My future riding (next year) may include a trip south of the border, and as the budget doesn't allow for a Dual purpose bike (KLR650 being the smallest choice), I was curious how well a CT would work in undesirable locations/roads (gravel, ruts, and potholes galore). This would likely be one up and pulling a trailer (4x5 clamshell fiberglass body with 4x8 tires). One thing it seems in reviewing is that the CT is treadwise more resistant to puncture and traction in loose material is better. Has that proven to be the case? I will probably be needing to change the tires again this fall (4k+ trip this summer), so time to start asking now. I will be at the Rally, but because of work requirements I will only be at the Monday Evening and Tuesday morning activities :cry2: (staying at the KOA Sunday and Monday). Because of repairs to it and my wife's Vulcan 800 recently, my bike is a traveler, not a show piece, but I love her (did I say that in my outside voice :-O ).

Just curious, and thanks for any responses, :corn:
Ken
If You Can See Me - There I Am
Ken & Shelley (Harley the dog now in heaven)
Ken - '03 Voyager XII - Shelley - '97 Vulcan VN800A
formerly: 1965 Honda CB50; 1972 Honda CJ350; '80 Suzuki GS450L; '79 Yamaha XS1100;
User avatar
the2knights
Board Member
Board Member
Posts: 223
Joined: Sat Aug 04, 2012 1:05 pm
12
Current bike(s): Current 1999 Voyager XII 1993 Voyager XII 2005 Harley Road King
Past 86 Voyager XII Honda SilverWing Honda CB900Custom Suzuki GS1000 Yamaha 80
Location: Bloomington, IN
Has liked: 32 times
Been liked: 8 times

Re: dARKSIDE

Post by the2knights »

Have had the car tire over several miles of gravel, from hard pack to fresh poured #7 that was over 4" thick. Bike was loaded and 2 up, worked very well. Only have to worry about chasing the front end around with the rear wheel planted so firmly!
User avatar
Wahrsuul
Traveler
Traveler
Posts: 109
Joined: Mon Sep 15, 2014 12:57 am
10
Current bike(s): 95 Voyager XII
Location: Columbia SC
Has liked: 0
Been liked: 0

Re: dARKSIDE

Post by Wahrsuul »

Try as I might, I could NOT get the bead to set with the Nexen. I ended up going with the PR3 just to get the bike on the road. If I keep it, I'll have to get a spare rim and see about getting it seated on that one - maybe to the point of some machining to get things working. I've used CTs on my big bikes, and I miss it on this one.
lockwoodjohn
Traveler
Traveler
Posts: 135
Joined: Fri Sep 20, 2013 1:34 am
11
Current bike(s): 1995 Kawasaki 1200 Voyager VII
Location: Lockwood,New York
Has liked: 0
Been liked: 0

Re: dARKSIDE

Post by lockwoodjohn »

Hi everyone, Over July 4th weekend I to went darkside. Love the tire. Putting a Mitchlin Comander 11 on the front this week end. What tire pressure is recommended in the front tire? 36 to40 lbs just like the Dunlops?
voyager55
Elite Tourer
Elite Tourer
Posts: 820
Joined: Mon Aug 19, 2013 6:08 am
11
Current bike(s): 2003 1200
Location: Eden Prairie, MN
Has liked: 1 time
Been liked: 3 times

Re: dARKSIDE

Post by voyager55 »

I got a new Nexen tire mounted on a spare rim I got from Carl.. Seated well, But the darn thing looses 3-4 lbs over a few days. Checked everything, air valve etc. Put soapy water on everything, can't see a leak.
I don't want to put it on the bike, can't trust it.
Will probably stick to bike tires.
Going to try Pirelli MT 66 tires next
User avatar
SgtSlag
King of the Road
King of the Road
Posts: 1054
Joined: Mon Oct 04, 2010 10:04 pm
14
Current bike(s): 1993 Voyager XII (2010)
(2006-2012: 1979 Honda CB750K)
(2008-2010: 1983 Kawasaki 440LTD, belt drive)
Location: Minnesota
Has liked: 23 times
Been liked: 235 times

Re: dARKSIDE

Post by SgtSlag »

Make sure you check back in with your impression of the Pirelli's... :devl

Cheers!
SgtSlag

1993 Voyager XII
User avatar
chevyman1
Board Member
Board Member
Posts: 731
Joined: Sat Jun 06, 2009 5:59 pm
15
Current bike(s): 1990 Kawasaki Voyager XII
1991 Kawasaki Voyager XII
1993 Kawasaki Voyager XII
1972 Yamaha LS2 100cc twin 2 stroke
Location: Myerstown, Pa.
Has liked: 0
Been liked: 16 times

Re: dARKSIDE

Post by chevyman1 »

voyager55 wrote:I got a new Nexen tire mounted on a spare rim I got from Carl.. Seated well, But the darn thing looses 3-4 lbs over a few days. Checked everything, air valve etc. Put soapy water on everything, can't see a leak.
I don't want to put it on the bike, can't trust it.
Will probably stick to bike tires.
Going to try Pirelli MT 66 tires next
Just a thought, If the temperature dropped 10+ deg. you will see that much loss in pressure. :hmm:
President - Mid-Atlantic Voyagers
1990 Voyager XII
1991 Voyager XII (Team Green)
1972 Yamaha LS2 (100cc Twin 2stroke)
Voyagers Voice editor SEND ME STORIES AND PICTURES PLEASE
to. (kew427@comcast.net)
User avatar
Pbpd183
Cruiser
Cruiser
Posts: 79
Joined: Fri Aug 08, 2014 10:29 pm
10
Current bike(s): 2010 Voyager 1700
Location: Palm Bay, Florida
Has liked: 0
Been liked: 1 time

Re: dARKSIDE

Post by Pbpd183 »

I am interested in going to the darkside soon. Is there a list of installers that will do this?
I'm pretty close to my feet reaching the ground with my custom seat and progressive shocks. Will the CT raise the ride height any?
Dan
2010 Voyager 1700
Palm Bay, Florida
Previous
2000 Voyager 1209
Ozymandias
Cruiser
Cruiser
Posts: 40
Joined: Sat May 24, 2014 12:48 am
10
Current bike(s): 2010 Kawasaki 1700 Voyager
Location: Nebraska
Has liked: 1 time
Been liked: 0

Re: dARKSIDE

Post by Ozymandias »

chevyman1 wrote:
voyager55 wrote:I got a new Nexen tire mounted on a spare rim I got from Carl.. Seated well, But the darn thing looses 3-4 lbs over a few days. Checked everything, air valve etc. Put soapy water on everything, can't see a leak.
I don't want to put it on the bike, can't trust it.
Will probably stick to bike tires.
Going to try Pirelli MT 66 tires next
Just a thought, If the temperature dropped 10+ deg. you will see that much loss in pressure. :hmm:
Probably not that much. I did a quick-and-dirty calculation and the results seem to be in the range of about two-thirds of a lb for every 10F deg. change of temp. In practice the change may be different or I may have done something wrong, but when I did some test measurements during cooler times last winter the results seemed to be consistent.
1975 Goldwing (found a good home for it)
2003 Nomad 1500 (traded for the Voyager)
2010 Voyager 1700
User avatar
usmalenurse
Traveler
Traveler
Posts: 204
Joined: Thu Jun 24, 2010 12:13 pm
14
Current bike(s): 1997 Voyager 1200
2016 Honda Goldwing
Location: Roseboro, North Carolina
Has liked: 7 times
Been liked: 40 times

Re: dARKSIDE

Post by usmalenurse »

lockwoodjohn wrote:Hi everyone, Over July 4th weekend I to went darkside. Love the tire. Putting a Mitchlin Comander 11 on the front this week end. What tire pressure is recommended in the front tire? 36 to40 lbs just like the Dunlops?
I've been running the Commander II's and have always ran them at 40 lbs. I like the Commanders but also switched to CT on the rear last fall.
Charles Hairr
1997 Voyager XII
2016 Honda Goldwing
lockwoodjohn
Traveler
Traveler
Posts: 135
Joined: Fri Sep 20, 2013 1:34 am
11
Current bike(s): 1995 Kawasaki 1200 Voyager VII
Location: Lockwood,New York
Has liked: 0
Been liked: 0

Re: dARKSIDE

Post by lockwoodjohn »

Thank you for your input!!
User avatar
Pbpd183
Cruiser
Cruiser
Posts: 79
Joined: Fri Aug 08, 2014 10:29 pm
10
Current bike(s): 2010 Voyager 1700
Location: Palm Bay, Florida
Has liked: 0
Been liked: 1 time

Re: dARKSIDE

Post by Pbpd183 »

Well I found a tire shop that is willing to mount a CT on the voyager. He was trying very hard to talk me out of it convinced I would hate it. He claims it will feel like I'm riding on a bridge grate the entire time. He claims the crown on the roads here in Florida will cause me to correct for the flat contact patch constantly.

Anybody have experience with this? I have not heard any bad comments on going to the darkside on the voyager.
Dan
2010 Voyager 1700
Palm Bay, Florida
Previous
2000 Voyager 1209
User avatar
Lucasind
King of the Road
King of the Road
Posts: 1790
Joined: Mon Dec 17, 2012 5:44 pm
11
Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts !
Location: Toledo, OH
Has liked: 191 times
Been liked: 69 times

Re: dARKSIDE

Post by Lucasind »

I experienced what might be called a"break in period" did not like the way the bike rode and handled after using up my previous Avons..... was starting to think "what did I do" ?
Well I just kept putting miles on the Nexen/rear,Dunlop E3 combo,and various tire pressures, and now have 7000 miles on them and will stick with this tire combo in the future .....love it ! and they are wearing very well.
90% OF ANY JOB ...IS GETTING STARTED !
User avatar
Pbpd183
Cruiser
Cruiser
Posts: 79
Joined: Fri Aug 08, 2014 10:29 pm
10
Current bike(s): 2010 Voyager 1700
Location: Palm Bay, Florida
Has liked: 0
Been liked: 1 time

Re: dARKSIDE

Post by Pbpd183 »

Lucasind wrote:I experienced what might be called a"break in period" did not like the way the bike rode and handled after using up my previous Avons..... was starting to think "what did I do" ?
Well I just kept putting miles on the Nexen/rear,Dunlop E3 combo,and various tire pressures, and now have 7000 miles on them and will stick with this tire combo in the future .....love it ! and they are wearing very well.
Thank you sir :thanks:
Dan
2010 Voyager 1700
Palm Bay, Florida
Previous
2000 Voyager 1209
User avatar
doug of so fla
Grand Tourer
Grand Tourer
Posts: 431
Joined: Tue Feb 19, 2008 6:17 pm
16
Current bike(s): 07 gold wing
Location: summerfield, fl
Has liked: 0
Been liked: 1 time

Re: dARKSIDE

Post by doug of so fla »

I have 25,000 miles on a Run flat Michelin Radial tire on my Goldwing, Will probably go another 5000mi & it was used when i got it. I have only been riding around on north central Florida roads and would never go back to a standard M/C tire unless they improve them tremendously!!
It is the best tire I have ever used on a M/C in over a half million miles of m/c riding.
Go to website GL1800riders.com on the "Darksider" forum and you will find about 1900 darkside riders and just with a couple of hundred riders posting their miles on a car tire, totaled up to over 10, million miles. M/C's have been using them for years with absolutely no problems with them.
I know of no runflats for a Voyager and would not put a regular cheap standard old car tire on XII, Nexen, seems to work but mounting it sometimes is a dangerous problem. Do some research before you do it. Most of the problem is mounting it, but if it is a good tire it will give you trouble free safe miles.. The 15"XII rim is hard to find a good runflat car tire for... Ride Safe..
doug of no fla
User avatar
Pbpd183
Cruiser
Cruiser
Posts: 79
Joined: Fri Aug 08, 2014 10:29 pm
10
Current bike(s): 2010 Voyager 1700
Location: Palm Bay, Florida
Has liked: 0
Been liked: 1 time

Re: dARKSIDE

Post by Pbpd183 »

Finally did it. So far, I love it.

Image
These users liked Pbpd183's post:
Bonnie and Clyde (Thu May 05, 2022 9:03 pm)
Rating: 11.11%
Dan
2010 Voyager 1700
Palm Bay, Florida
Previous
2000 Voyager 1209
6ft1_grand
Cruiser
Cruiser
Posts: 75
Joined: Sun Dec 21, 2014 5:51 pm
9
Current bike(s): 1995 Kawasaki Voyager
Location: Gresham, OR
Has liked: 0
Been liked: 1 time

Re: dARKSIDE

Post by 6ft1_grand »

Image
Here's mine
These users liked 6ft1_grand's post:
Bonnie and Clyde (Thu May 05, 2022 9:04 pm)
Rating: 11.11%
Image
-John-
95 Voyager XII
Past rides
85 Voyager 1300
08 Kawasaski 500 LTD
02 Yamaha V-Star 1100
96 Yamaha Virago 750
81 Honda CM400T
72 Honda CB175
User avatar
Pbpd183
Cruiser
Cruiser
Posts: 79
Joined: Fri Aug 08, 2014 10:29 pm
10
Current bike(s): 2010 Voyager 1700
Location: Palm Bay, Florida
Has liked: 0
Been liked: 1 time

Re: dARKSIDE

Post by Pbpd183 »

I went for a 100+ ride today on the new tire. I found that at 65 mph and up, it felt very "squirrelly" like it was chasing center. I am running 38 psi in the tire and 32 on the front. I know I need to adjust tire pressure but should I go with more psi or less?
Should I also adjust the front tire pressure?
I have progressive shocks front and rear. The rears are set to the highest preload. Would it help to lessen the preload?
:hmm:
Dan
2010 Voyager 1700
Palm Bay, Florida
Previous
2000 Voyager 1209
User avatar
Barry
Grand Tourer
Grand Tourer
Posts: 398
Joined: Thu Feb 21, 2008 2:00 pm
16
Current bike(s): 87 Voyager 12
Has liked: 100 times
Been liked: 69 times

Re: dARKSIDE

Post by Barry »

Hi Dan,
I had a similar experience, but it occurred at 70+, and not all the time. I have progressives on the front, factory shocks rear. I am running an Avon Venom on the front that had started cupping. I increased the front to 40 and run 40-42 in the rear. My rear tire is a nexen. I softened the rear suspension and the problem gradually went away. Even the cupping is almost totally gone now. What tires are you running?
Barry
87 Voyager XII
Post Reply

Return to “General - Voyager XII (1200 Four)”