Will a coil from a Honda CBX 750 work in a Voyager ZN1300? They look the same and the CBX are a bit cheaper.
Thoughts?
CBX coil in ZN1300
Moderators: the2knights, Highway Rider
-
Van Voyager
- Grand Tourer
- Posts: 430
- Joined: Wed Aug 30, 2017 8:01 am
- 6
- Current bike(s): 1986 Kawasaki ZN1300 Voyager
- Has liked: 43 times
- Been liked: 37 times
Re: CBX coil in ZN1300
You can't go by looks. The coils are impedance matched to the electrical system driving them. You need to start by comparing the static resistance of the OEM coils to the resistance of the coils you want to use.
-
samchar12
- Cruiser
- Posts: 52
- Joined: Sun May 18, 2014 2:37 pm
- 9
- Current bike(s): 1988 ZN1300
1982 GL500i - Location: Powder Springs, GA
- Has liked: 0
- Been liked: 0
Re: CBX coil in ZN1300
From what I found the CBX coils are 2.5 ohm Primary and 13.85 ohm secondary. Isn't that where the ZN1300 should be?