Still wont start
Moderators: the2knights, Highway Rider
-
samchar12
- Cruiser
- Posts: 52
- Joined: Sun May 18, 2014 2:37 pm
- 9
- Current bike(s): 1988 ZN1300
1982 GL500i - Location: Powder Springs, GA
- Has liked: 0
- Been liked: 0
Still wont start
Still can't get it to start. Cranks strong and sound like its trying to start. Getting some heat from the crankcase so I think at least a cylinder is firing. Have spark at all cylinders and fresh battery. Did a compression and fuel pressure test and reads as follows: 1-150 2-115 3-120 4-120 5-110 6-145 35 psi fuel. What could cause the difference in compression? Any thoughts?
-
Van Voyager
- Grand Tourer
- Posts: 430
- Joined: Wed Aug 30, 2017 8:01 am
- 6
- Current bike(s): 1986 Kawasaki ZN1300 Voyager
- Has liked: 43 times
- Been liked: 37 times
Re: Still wont start
You're holding the throttle WFO for the test, right? Worst case, you got some bad rings or bad valves or both. Best case: rings are a bit sticky (From sitting a long time) and/or valves clearance is out of spec. Have you verified valve clearance?