Well, I got them in and everything is temporarily hooked up enough to run. It hasn't been synchronized yet.
The engine will turn over nicely but it doesn't want to catch and start running. I'm hoping that it's an adjustment issue somewhere. I turned the idle knob a few turns and it at least grabs for a few seconds. Fuel is getting to the carbs.
Carbs are in!!
Moderators: the2knights, Highway Rider
-
Chris Cochran
- Traveler
- Posts: 183
- Joined: Tue May 10, 2022 12:32 am
- 2
- Current bike(s): 2005 Virago 250
2006 Vulcan 750
1986 Voyager XII - Has liked: 61 times
- Been liked: 58 times
-
GrandpaDenny
- Elite Tourer
- Posts: 995
- Joined: Fri Nov 01, 2019 4:24 pm
- 4
- Current bike(s): 1993 Kawasaki Vulcan 1500
- Has liked: 433 times
- Been liked: 393 times
Re: Carbs are in!!
Simple things first. Did you hook the choke up and adjust it correctly?Chris Cochran wrote: ↑Tue Nov 08, 2022 4:13 am Well, I got them in and everything is temporarily hooked up enough to run. It hasn't been synchronized yet.
The engine will turn over nicely but it doesn't want to catch and start running. I'm hoping that it's an adjustment issue somewhere. I turned the idle knob a few turns and it at least grabs for a few seconds. Fuel is getting to the carbs.
- These users liked GrandpaDenny's post:
- cushman eagle (Thu Nov 10, 2022 1:28 am)
- Rating: 12.5%
Dennis Fariello
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased
1993 Vulcan 88 "Emily"
South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders
VXII Manuals:
https://amervoyassoc.org/zg1200manuals.php
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased
1993 Vulcan 88 "Emily"
South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders
VXII Manuals:
https://amervoyassoc.org/zg1200manuals.php