So is there some magic words to get the wire out from under this tab? It doesn't look like the plug will fit through, and i can be a bit ham-fisted, so I'm hesitant to just pry it up and chance tearing the rivet out of the lower tank...i want to bring the radiator to a shop to flush and pressure test, but not with the fan and wires on it.
Thanks!
Radiator
Moderators: the2knights, Highway Rider
-
VoyKimmer
- Grand Tourer
- Posts: 515
- Joined: Mon Mar 03, 2008 12:47 am
- 16
- Current bike(s): 2002 Voyager XII
1996 Voyager XII - Location: Gurnee, Illinois
- Has liked: 0
- Been liked: 98 times
Re: Radiator
Pry it open with little flat screw driver then when you have clearance use a small needle nose plyers to open it.
Take it slow. It will open up.
Take it slow. It will open up.
-
Conrad
- Cruiser
- Posts: 96
- Joined: Fri Jul 15, 2022 12:13 am
- 1
- Current bike(s): 93 kawasaki voyager xii
89 yamaha venture royale - Has liked: 25 times
- Been liked: 55 times
Re: Radiator
Got it apart fine, thanks again! I've broken so many little tabs and such over the years i tend to hesitate.
- These users liked Conrad's post:
- cushman eagle (Sat Feb 24, 2024 9:48 pm)
- Rating: 12.5%