84 zn1300 voyager DFI box bad
Moderators: the2knights, Highway Rider
-
- Newbie
- Posts: 2
- Joined: Mon May 06, 2024 12:02 am
- Current bike(s): 1983 kawasaki zn1300 voyager
- Has liked: 0
- Been liked: 0
84 zn1300 voyager DFI box bad
I have a 1984 zn1300 voyager and my DFI box is bad it's sending power to some tings but not my injectors I can bypass them but then they are open all the time and not all of them get power from the box does anyone have any suggestions
- Me Again
- King of the Road
- Posts: 1784
- Joined: Sun Feb 24, 2008 4:27 am
- 16
- Current bike(s): 1988 1300 Voyager
- Location: Wisconsin
- Has liked: 0
- Been liked: 257 times
Re: 84 zn1300 voyager DFI box bad
Before you condemn the ECU double check all the pins for tightness. I had one that wouldn't start even with a known good one and found a single pin was loose in the harness.
- These users liked Me Again's post:
- cushman eagle (Thu May 16, 2024 10:48 pm) • Van Voyager (Sat May 18, 2024 6:58 am)
- Rating: 22.22%
- Me Again
- King of the Road
- Posts: 1784
- Joined: Sun Feb 24, 2008 4:27 am
- 16
- Current bike(s): 1988 1300 Voyager
- Location: Wisconsin
- Has liked: 0
- Been liked: 257 times
Re: 84 zn1300 voyager DFI box bad
I read your post on Facebook and it really sounds more like a relay or a bad/corroded connection