/another question

Got a tech tip for Voyager 12's from your personal experiences, or one complete with pictures and instructions, here's where to post it. You can also ask about tips or procedures here.

Moderators: the2knights, Highway Rider

User avatar
Danger4u2
Cruiser
Cruiser
Posts: 50
Joined: Sun Jan 14, 2018 3:55 am
6
Current bike(s): 1995 Voyager XII
2011 BMW R1200 GSA
4 KX500's
1976 KT 250
doodle bug mini bike
Has liked: 0
Been liked: 2 times

Re: /another question

Post by Danger4u2 »

So when you put in 3 quarts 22 oz. where is it in the sight glass? Over full, half way, no oil at all? I've only changed it once. On the center stand in ambient tempture I put it at the full line. Good, bad? Inquiring minds want to know.
Thanks.
KX500 is Danger4u2
Go faster than everyone, you only have to look forward.
User avatar
Highway Rider
Webmaster
Webmaster
Posts: 847
Joined: Sat Mar 22, 2008 12:19 pm
16
Current bike(s): 2003 ZG1200 Voyager
2006 VN900
1978 KZ650 D1 SR
Has liked: 131 times
Been liked: 32 times

Re: /another question

Post by Highway Rider »

So when you put it on the center stand now where is it in the sight window
Webmaster
Jim & Karol
2003 Voyager XII
IBA #57976
IBA 1500 miles in 24 hours
IBA 1500 miles in 36 hours
IBA 1000 miles in 24 hours
It's not the destination, It's the ride
User avatar
SgtSlag
King of the Road
King of the Road
Posts: 1030
Joined: Mon Oct 04, 2010 10:04 pm
13
Current bike(s): 1993 Voyager XII (2010)
(2006-2012: 1979 Honda CB750K)
(2008-2010: 1983 Kawasaki 440LTD, belt drive)
Location: Minnesota
Has liked: 23 times
Been liked: 218 times

Re: /another question

Post by SgtSlag »

I ignore the sight window. I just put in 3 qt., 22 oz. I don't bother checking the sight window. Owned my Voyager XII since 2010. We've put 20,000 miles on it, around 8 oil changes (one/year, 4-6 month riding season), without any oil issues, or usage. I would not worry about it.

Having said that, I would drain the oil, opening both drain plugs, and change the filter (every time), and put 3 qt. 22 oz. in it. Then run it down the road, and put it on the center stand, at home. Come back the next day, and check the sight glass. Repeat this process randomly, for three months, or until your next oil change. Make notes on the level in the glass. This will give you a pattern, or average, to expect. The 3 qt. 22 oz. is from Carl Leo, a retired Kawasaki Certified Voyager XII mechanic. Nearly everyone on this forum follows his recommendations, and uses the 3qt. 22 oz. oil volume, for oil + filter changes, without issue. Cheers!

:perfect10: :perfect10: :thmup: :wnk2:
SgtSlag

1993 Voyager XII
cushman eagle
King of the Road
King of the Road
Posts: 1936
Joined: Sat Jan 22, 2011 10:08 pm
13
Current bike(s): '99 Kawasaki Voyager 1200
1958 Cushman Eagle restoration has been finished,and have put 3030 miles on her!
Location: Orrville,Ohio
Has liked: 808 times
Been liked: 271 times

Re: /another question

Post by cushman eagle »

With my bike level,right to left,it is just above center of the sight glass :thmup: This is after the engine cools down from a ride following an oil change. :corn:
'99 Voyager VXII,'58 Cushman Eagle
User avatar
cranky
King of the Road
King of the Road
Posts: 1037
Joined: Wed Jul 06, 2016 12:36 am
7
Current bike(s): 2003 Voyager
Location: San Jose, KalEfornYa
Has liked: 303 times
Been liked: 78 times

Re: /another question

Post by cranky »

... + 1 ... I'm guessing here but I'd say mine is about 3/4 of the glass, and
of course, burns/loses no oil...
'03 Voyager - http://tinyurl.com/mqtgpwp VROC pics of Gina
Cranky - Bill Snodgrass AVA # 6544. VROC # 16804
Cranked >128K miles, Mtn bike-no motor!!!
San Jose, KalEfornYa
User avatar
ekap1200
Master Fabricator
Master Fabricator
Posts: 1363
Joined: Fri Jul 04, 2008 12:54 pm
15
Current bike(s): 2000 voyager end of year total. 108.634
Location: Williamstown, New Jersey
Has liked: 30 times
Been liked: 134 times

Re: /another question

Post by ekap1200 »

cushman eagle wrote:With my bike level,right to left,it is just above center of the sight glass :thmup: This is after the engine cools down from a ride following an oil change. :corn:

I always thought that level was a bit dynamic / changing as the engine pumps oil up to the front pinion. And then as the bike sits a spell the oil finds a lower level as is seeps back down thru the bearing .
Personally I never look at it. I do give the underside a visual looking at for leaks but pretty much 3qts-22oz's and run it until its time for a change. 95,584 miles as of today. Looked at the sight glass maybe 20 times in all that mileage .
Gene
"Its not bad if you don't know something, but when you don't know you don't know; That's when your in trouble". Joe Place 1912-2008 (my grandfather)
User avatar
Danger4u2
Cruiser
Cruiser
Posts: 50
Joined: Sun Jan 14, 2018 3:55 am
6
Current bike(s): 1995 Voyager XII
2011 BMW R1200 GSA
4 KX500's
1976 KT 250
doodle bug mini bike
Has liked: 0
Been liked: 2 times

Re: /another question

Post by Danger4u2 »

Thanks guys, I'll try the 3 quarts 22 oz. and let you know where it settles. Since my bike is new to me I watched the oil for the first few thousand miles.
Like most Kawi's if it's not leaking or burning it's ok. Unless it's a KLR650. Mine was a 2007 the last year of the Gen.1. Never saw any smoke and it didn't leak. But if you run them at 75 to 80 mph for long periods of time they use a little oil. I used the KLR for an SS1000 2017 Solar Eclipse Gold IBA ride. It used about half a sight glass in 1055 miles on that ride.
KX500 is Danger4u2
Go faster than everyone, you only have to look forward.
jengstrom
Newbie
Newbie
Posts: 4
Joined: Sat Jul 08, 2017 2:31 am
6
Current bike(s): 1995 Voyager Xii
Location: Rochester NY
Has liked: 0
Been liked: 1 time

Re: /another question

Post by jengstrom »

Highway Rider wrote:So when you put it on the center stand now where is it in the sight window
This is going to be different for everybody, I suspect. Not only are there slight variations in the bikes themselves, there is variation caused by front tire model, wear, and tire air pressure differences, as well as shock air pressure for those of us with the original front shocks. I think the best you can hope for is to figure out what's normal FOR YOUR BIKE and use that as your reference.

That said, now that I've had mine for a year, I've developed some confidence in it and don't check it very often. I've done 2 oil changes since I've had it. I follow the common advice to put in exactly 3qt 22oz (3.5 liters, like the manual calls for). With my bike, that puts the oil level about 2/3 up the sight glass.

John
User avatar
Danger4u2
Cruiser
Cruiser
Posts: 50
Joined: Sun Jan 14, 2018 3:55 am
6
Current bike(s): 1995 Voyager XII
2011 BMW R1200 GSA
4 KX500's
1976 KT 250
doodle bug mini bike
Has liked: 0
Been liked: 2 times

How much oil?

Post by Danger4u2 »

I changed the oil tonight. I pulled the oil filter and the 2 drain plugs and let it drip for a few hours.
I used a Wix # 24941 ($9 with tax @ O'Reilly Auto Parts) that comes with the 2 o-rings. Torqued the filter @ 174 in-lb (14.5 ft-lb) and the drain bolts @
264 in-lb (22 ft-lb). I added Castrol 10-40 simi-synthetic Act>Evo Motorcycle oil.

I used 3 quarts 22 ounce and started the engine just long enough to pressure the system.
I let it set for 30 minutes and it was at the half way mark on the sight glass.
So your suggestion of 3 quarts 22 oz. was right on the mark, pun intended.

Edit 9/9/18: I removed my joke with the wrong amount, I didn't want anyone to get the wrong amount stuck in their head.
KX500 is Danger4u2
Go faster than everyone, you only have to look forward.
User avatar
cranky
King of the Road
King of the Road
Posts: 1037
Joined: Wed Jul 06, 2016 12:36 am
7
Current bike(s): 2003 Voyager
Location: San Jose, KalEfornYa
Has liked: 303 times
Been liked: 78 times

Re: /another question

Post by cranky »

... be still my heart!!! GBG ...... had me goin' there!!!!!
Hope all is great!!!!

Mine was over full when I got it, I
over filled it on change, my wrench did it... and from now
on ... he only gets 3qt 22oz of oil!!!, and I used 15x50
which is too thick, and it made noises...

Last time I made sure he put in 3/22 and I used
Mobil 1 motorcycle oil, yeah, expensive, but finance
it over a year, and big whoop!!!!! Made a BIG difference!!!
'03 Voyager - http://tinyurl.com/mqtgpwp VROC pics of Gina
Cranky - Bill Snodgrass AVA # 6544. VROC # 16804
Cranked >128K miles, Mtn bike-no motor!!!
San Jose, KalEfornYa
User avatar
dsmmrm
Cruiser
Cruiser
Posts: 92
Joined: Tue Jun 20, 2017 12:41 pm
6
Current bike(s): 2001 Kawasaki Voyager XII
1996 Kawasaki Vulcan 1500 Classic
Has liked: 0
Been liked: 2 times

Re: /another question

Post by dsmmrm »

Danger4u2 wrote:Thanks guys, I'll try the 3 quarts 22 oz. and let you know where it settles. Since my bike is new to me I watched the oil for the first few thousand miles.
Like most Kawi's if it's not leaking or burning it's ok. Unless it's a KLR650. Mine was a 2007 the last year of the Gen.1. Never saw any smoke and it didn't leak. But if you run them at 75 to 80 mph for long periods of time they use a little oil. I used the KLR for an SS1000 2017 Solar Eclipse Gold IBA ride. It used about half a sight glass in 1055 miles on that ride.

Good God, man. You rode a KLR for 1055 miles? Do you still have the stock vinyl suppository they call a seat on it? You should get credit for 2,000 at the very least. Road miles on a KLR are like dog years. Off the beaten path, however, it's a different story. I miss mine but the most mileage I have ever been able to endure in one day was 500, give or take a few.
--
Dave Morrow
Vermilion, Ohio
small herd of kaws
User avatar
Danger4u2
Cruiser
Cruiser
Posts: 50
Joined: Sun Jan 14, 2018 3:55 am
6
Current bike(s): 1995 Voyager XII
2011 BMW R1200 GSA
4 KX500's
1976 KT 250
doodle bug mini bike
Has liked: 0
Been liked: 2 times

Re: /another question

Post by Danger4u2 »

Yes, of the 13 IBA rides I've done, that was the hardest on my body. I had the Corbin flat seat. Better than a stock KLR seat but only by 25%.
I met more people on that KLR than any other bike I've had. I should say more people that I still ride with. I bought it new in late '06, it was an '07.
I put a little more than 27,000 on it before I traded it for my '95 Voyager XII. I've done 2 IBA's on the Voyager. An SS1000 to Midland,TX and back to Okc.
Then, on the Spring Equinox this year, I did an SS1000 IN-CITY Insanity Okc. 1056 miles in less than 24 hours and never left Oklahoma City.
It sure is a big difference riding the Voyager instead of the KLR. Night and day comfort.
KX500 is Danger4u2
Go faster than everyone, you only have to look forward.
User avatar
dsmmrm
Cruiser
Cruiser
Posts: 92
Joined: Tue Jun 20, 2017 12:41 pm
6
Current bike(s): 2001 Kawasaki Voyager XII
1996 Kawasaki Vulcan 1500 Classic
Has liked: 0
Been liked: 2 times

Re: /another question

Post by dsmmrm »

Mine had the Corbin seat, too. Mostly just a bigger suppository made of brick. I agree it is marginally better than the stock seat. Of all the bikes I have had come and go I miss that one the most. Mine was '96.
--
Dave Morrow
Vermilion, Ohio
small herd of kaws
User avatar
Danger4u2
Cruiser
Cruiser
Posts: 50
Joined: Sun Jan 14, 2018 3:55 am
6
Current bike(s): 1995 Voyager XII
2011 BMW R1200 GSA
4 KX500's
1976 KT 250
doodle bug mini bike
Has liked: 0
Been liked: 2 times

Re: /another question

Post by Danger4u2 »

dsmmrm wrote:Mine had the Corbin seat, too. Mostly just a bigger suppository made of brick. I agree it is marginally better than the stock seat. Of all the bikes I have had come and go I miss that one the most. Mine was '96.
That's the best part of the KLR, '96 or '07, only thing that changed was the color. Black and Gold was the fastest.

dsmmrm, I moved our KLR/IBA discussion to a more appropriate thread.
https://www.amervoyassoc.org/forum/view ... 172#p85172
KX500 is Danger4u2
Go faster than everyone, you only have to look forward.
Post Reply

Return to “Tech Tips - Voyager XII (1200 Four)”