Headlight replacement from stock to LED
Moderators: the2knights, Highway Rider
-
kissintel
- Newbie
- Posts: 3
- Joined: Fri Jun 22, 2018 3:55 pm
- 5
- Current bike(s): 2010 Kawasaki Vulcan Voyager 1700
- Has liked: 1 time
- Been liked: 0
Headlight replacement from stock to LED
I'm sure this has been discussed but how difficult it it to swap the stock H4 bulb for LED? Do I need to remove the fairing?
-
GrandpaDenny
- Elite Tourer
- Posts: 995
- Joined: Fri Nov 01, 2019 4:24 pm
- 4
- Current bike(s): 1993 Kawasaki Vulcan 1500
- Has liked: 431 times
- Been liked: 393 times
Re: Headlight replacement from stock to LED
Nope, not at all. Two screws on the fairing under the headlight hold the headlight bezel in. Be careful pulling it off, as the tabs up top can break. Then four screws holding the headlight in. A rubber boot then a clip holding the bulb in. When you put the LED bulb in, follow the instructions that come with it regarding focus so you (hopefully) get a decent pattern.
- These users liked GrandpaDenny's post:
- Dtown (Sun Mar 13, 2022 7:35 pm)
- Rating: 12.5%
Dennis Fariello
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased
1993 Vulcan 88 "Emily"
South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders
VXII Manuals:
https://amervoyassoc.org/zg1200manuals.php
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased
1993 Vulcan 88 "Emily"
South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders
VXII Manuals:
https://amervoyassoc.org/zg1200manuals.php