rear valve stem
Moderators: the2knights, Highway Rider
-
glennmorgan
- Newbie
- Posts: 3
- Joined: Thu Jun 16, 2022 1:35 am
- 1
- Current bike(s): 1996 voyager
- Has liked: 0
- Been liked: 0
rear valve stem
looking for the rear tire valve stem for my 96 are they the same size as the front i can find those but for the rear every body wans 30 dollars
-
GrandpaDenny
- Elite Tourer
- Posts: 995
- Joined: Fri Nov 01, 2019 4:24 pm
- 4
- Current bike(s): 1993 Kawasaki Vulcan 1500
- Has liked: 432 times
- Been liked: 393 times
Re: rear valve stem
They are the same size but different angles. The front has a 45 degree bend to clear the brake discs, the rear 90 to clear the final drive. Some guys run straight valve stems on the front - I have no idea off the top of my head if there's enough room to do the same on the rear.
Dennis Fariello
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased
1993 Vulcan 88 "Emily"
South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders
VXII Manuals:
https://amervoyassoc.org/zg1200manuals.php
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased
1993 Vulcan 88 "Emily"
South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders
VXII Manuals:
https://amervoyassoc.org/zg1200manuals.php
-
Nails
- King of the Road
- Posts: 1674
- Joined: Thu Feb 16, 2017 4:37 pm
- 7
- Current bike(s): '97 XII
'00 XT350
'85 KLR 250
'82 Silverwing Sushiguzzi - Location: New Mexico Rockies
- Has liked: 204 times
- Been liked: 549 times
Re: rear valve stem
FWIW, I recommend installing the rear stem backwards, toward the brake rather than the final drive. Easier to reach when the bike is on the side stand.
- These users liked Nails's post:
- Scott-(Altoona, PA) (Sun May 21, 2023 10:22 pm)
- Rating: 12.5%
--
Nails
Nails