The Voyager Whine

Got a tech tip for Vulcan Voyager 1700's from your personal experiences, or one complete with pictures and instructions, here's where to post it. You can also ask about tips or procedures here.

Moderators: the2knights, Highway Rider

Post Reply
Danny
Streetster
Streetster
Posts: 18
Joined: Wed Feb 04, 2015 3:00 am
9
Current bike(s): 2011 Voyager
Location: Texas
Has liked: 0
Been liked: 0

The Voyager Whine

Post by Danny »

A little over a year ago I bought a very lightly used 2011 Voyager with 6400 miles on it. He must have rode it in the garage, there wasn't a blimish on it.
ANYWAY, Kawasaki donated a KAMS kit, and I paid the labor, but the drive belt (new to me) whined. I asked about it, and a dealer said: it's in spec.
I heard Harley riders talk about "belt whine", and I found it annoying, and concerning, so I started researching.
An old Harley mechanic said Harley factory, and shops, and rice burner factories, and shops set the belt deflection too tight.
Well, my son and I put mine on the Jack stand, and it was barely 3/8". Manual says: see dealer.
Harley says "I think" 3/8" to 7/16" deflection. I know it ain't a Harley but, same principle.
We set mine at 5/16". Whine gone, shifts smoother, seems o pull better. Now all I hear is the tires, wind, and exhaust. This has to be better on bearings front and back.
User avatar
David (N. Alabama)
Elite Tourer
Elite Tourer
Posts: 816
Joined: Thu Feb 21, 2008 1:20 pm
16
Current bike(s): 2007 Kawasaki Mean Streak
2010 Kawasaki Vulcan Voyager 1700
2011 Kawasaki Versys
2012 Kawasaki KLX250S
2010 Moto Guzzi V7 Café Classic
1975 Kawasaki KT250 Trials
2014 Triumph Trophy SE
Location: Tennessee
Has liked: 0
Been liked: 0

Re: The Voyager Whine

Post by David (N. Alabama) »

Danny wrote:A little over a year ago I bought a very lightly used 2011 Voyager with 6400 miles on it. He must have rode it in the garage, there wasn't a blimish on it.
ANYWAY, Kawasaki donated a KAMS kit, and I paid the labor, but the drive belt (new to me) whined. I asked about it, and a dealer said: it's in spec.
I heard Harley riders talk about "belt whine", and I found it annoying, and concerning, so I started researching.
An old Harley mechanic said Harley factory, and shops, and rice burner factories, and shops set the belt deflection too tight.
Well, my son and I put mine on the Jack stand, and it was barely 3/8". Manual says: see dealer.
Harley says "I think" 3/8" to 7/16" deflection. I know it ain't a Harley but, same principle.
We set mine at 5/16". Whine gone, shifts smoother, seems o pull better. Now all I hear is the tires, wind, and exhaust. This has to be better on bearings front and back.
Been discussed many times since '09. Deflection is in the service manual.

Thanks for the reminder though. Be nice if we had stickys for this type of thing.

How did you get Kawasaki to throw in the KAMS for your bike? Send me a PM please.
2010 Voyager 1700
Image
rock42
Cruiser
Cruiser
Posts: 43
Joined: Thu Jun 18, 2015 4:05 pm
8
Current bike(s): 2015 Kawasaki voyager
1995 Harley dyna wide glide
1975 Goldwing
1982 goldwing interstate
Has liked: 0
Been liked: 0

Re: The Voyager Whine

Post by rock42 »

i have had my 2015 voyager about a month and i keep hearing about kams kit i have no idea what that is and if i need one. could someone expain it to me please. thanks
otter
Streetster
Streetster
Posts: 15
Joined: Mon Aug 03, 2015 7:02 pm
8
Current bike(s): 2015 Voyager
Has liked: 0
Been liked: 0

Re: The Voyager Whine

Post by otter »

here you go, routes heat away and down from the rider and passenger.

http://www.kawasaki.ca/accessory/kawasa ... ystem-kit/
User avatar
Me Again
King of the Road
King of the Road
Posts: 1750
Joined: Sun Feb 24, 2008 4:27 am
16
Current bike(s): 1988 1300 Voyager
Location: Wisconsin
Has liked: 0
Been liked: 223 times

Re: The Voyager Whine

Post by Me Again »

rock42 wrote:i have had my 2015 voyager about a month and i keep hearing about kams kit i have no idea what that is and if i need one. could someone expain it to me please. thanks
Don't need it on a 2015
I believe it is stock on 2012 and newer
User avatar
David (N. Alabama)
Elite Tourer
Elite Tourer
Posts: 816
Joined: Thu Feb 21, 2008 1:20 pm
16
Current bike(s): 2007 Kawasaki Mean Streak
2010 Kawasaki Vulcan Voyager 1700
2011 Kawasaki Versys
2012 Kawasaki KLX250S
2010 Moto Guzzi V7 Café Classic
1975 Kawasaki KT250 Trials
2014 Triumph Trophy SE
Location: Tennessee
Has liked: 0
Been liked: 0

Re: The Voyager Whine

Post by David (N. Alabama) »

Me Again wrote:
rock42 wrote:i have had my 2015 voyager about a month and i keep hearing about kams kit i have no idea what that is and if i need one. could someone expain it to me please. thanks
Don't need it on a 2015
I believe it is stock on 2012 and newer
Yes, it is stock on 2012 and newer.
2010 Voyager 1700
Image
User avatar
hank43
Grand Tourer
Grand Tourer
Posts: 477
Joined: Sun Jan 23, 2011 6:06 am
13
Current bike(s): 2009 Vulcan Voyager Now A
Champion Trike
Location: sacramento, california
Has liked: 1 time
Been liked: 4 times

Re: The Voyager Whine

Post by hank43 »

If you're on a ride and can't adjust it, you can do this:
spray a little soapy water on the belt, whine gone instantly, will probably get you home until you can adjust properly.

hank43
Never meddle in the affairs of a dragon, for you are crunchy and taste good with ketchup!
Post Reply

Return to “Tech Tips - Voyager 1700 V-Twin”