Got a tech tip for Voyager 1300's from your personal experiences, or one complete with pictures and instructions, here's where to post it. You can also ask about tips or procedures here.
Hello again my fellow two wheel lovers, I have taken the turn signal/horn switch apart from the bar becasue it is exceptionally hard to move to the...
Last post
The self cancelling unit is notoriously sticky (even when brand new) on all 1300's models because it's a mechanical unit with the mechanical bits all...
Anyone flushed/changed fork oil on their 1300? Seems to me it would be trivial to remove the handle bars to get access to the fork caps (i.e. without...
Hello everyone, I searched the tech tips forums for the 1300 six and found nothing on removing the fairing. Here is where I am at on this. I have the...
Last post
I've had all the guts out of mine to clean up the audio connections and better route the the wiring but never had the fairing off. I do know there is...
Looking to buy a helmet lock for a 86 ZN1300 - does not have to have a key as I think I can get it re-keyed if necessary. The bike came with one lock...
Does anyone have the original ZN1300 battery dimensions (or know the original battery make/model number)? I think my battery is nearing it's EOL and...
Last post
Thanks MA.
Just in case anyone cares...
I ended up going with a new Deka ETX16L AGM battery; it's quite a bit smaller than the Yuasa that was...
Decided to put the original handlebar weights back on my 86 ZN1300. The OEM screws appear to have Red Loctite (or some kind of thread-locker) on them...
Last post
I broke off the allen bolts on the bar weights on my 1200. Replaced them with industrial allen screws in Black Steel. I did not use any thread locker...
A PO of my ZN1300 glued a square chrome cover over the front Master Cylinder cap blocking access to the cover screws. Presumably the the chrome piece...
Last post
Just updating this...
I pulled the chrome cover off - wasn't that difficult - it was probably 'glued' on with silicone as I was able to scrape off...
In a fit of insanity, I decided today would be a good day to lube my throttle cables. Getting the pull cable off the throttle linkage was crazy, but...
Last post
Sorry Van but I guess Alzheimer's is setting in. I keep thinking you have an XII Voyager. I will try to pay more attention to your posts from now on....
Good morning...
First, I already own a XII... But... The opportunity has arisen to purchase a ZN1300... Bike's been left outside for quit sometime.
I...
Last post
Hey guys...
The bad news... the opportunity got away from me.
Sometimes, my job keeps me from taking advantage of things....
The good news... I...
The straight Schrader Valve that a PO installed at the last rear tire change is proving to be a real pain in the ass. I can't find a local source...
Last post
Ended up purchasing a 90 degree valve stem for VN1500 (PART# 16126-1191). Can't remember how I figured that out but it's exactly what I needed. It'll...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
