Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Fork Spring Compressor
Moderators: the2knights, Highway Rider
-
Vtwinguy
- Newbie
- Posts: 8
- Joined: Fri Mar 15, 2013 10:55 pm
- 12
- Current bike(s): 1997 Kawasaki Voyager
- Has liked: 0
- Been liked: 0
Fork Spring Compressor
When you live alone and the neighbors aren't around sometimes you have to use a little ingenuity to solve some problems. Welded up a quick spring compressor that goes around my vise. Worked great and only took about an hour to draw it up and fabricate. Just thought I would share the idea.
"The Constitution was written so that the People could control their government NOT so the government could control it's people"........LT.Col Allen West
-
Lucasind
- King of the Road
- Posts: 1793
- Joined: Mon Dec 17, 2012 5:44 pm
- 12
- Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts ! - Location: Toledo, OH
- Has liked: 203 times
- Been liked: 72 times
Re: Fork Spring Compressor
.... Good idea !!! It took me a few minutes to see that the two lower tabs of your tool, hook under the vice jaws,,,, Looks like it should compress the fork spring quite well ! tony 
90% OF ANY JOB ...IS GETTING STARTED !
-
SgtSlag
- King of the Road
- Posts: 1070
- Joined: Mon Oct 04, 2010 10:04 pm
- 14
- Current bike(s): 1993 Voyager XII (2010)
(2006-2012: 1979 Honda CB750K)
(2008-2010: 1983 Kawasaki 440LTD, belt drive) - Location: Minnesota
- Has liked: 23 times
- Been liked: 249 times
Re: Fork Spring Compressor
Lacking welding skills, and equipment, I used a Gear Puller to push the top caps down into the fork tubes, so I could put the C-clips in place -- I gripped it on the triple-tree. It may be overkill, but it worked, in the end. Cheers!
SgtSlag
1993 Voyager XII
1993 Voyager XII