Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Trunk Tips
Moderators: the2knights, Highway Rider
-
JHD
- Traveler
- Posts: 158
- Joined: Fri May 27, 2011 4:58 am
- 13
- Current bike(s): '92 Voyager XII
'09 FLHT Police
'03 RE Bullet 500
'77 XS 360-2D - Location: Edmonds, WA
- Has liked: 0
- Been liked: 2 times
Trunk Tips
My trunk is a bear to slide back and forth. I completely disassembled cleaned and put it back together. Still doesn't slide back and forth easy. What gives, any tips? I'm afraid one of these times I'm going to push it off the center stand trying to push it back.
-
SgtSlag
- King of the Road
- Posts: 1070
- Joined: Mon Oct 04, 2010 10:04 pm
- 14
- Current bike(s): 1993 Voyager XII (2010)
(2006-2012: 1979 Honda CB750K)
(2008-2010: 1983 Kawasaki 440LTD, belt drive) - Location: Minnesota
- Has liked: 23 times
- Been liked: 249 times
Re: Trunk Tips
Get some white lithium grease in a spray can (safe on plastics), then lubricate the slides, and the release lever's bearings, making sure to work it in by moving things around a bit. It should free it up fairly well. Cheers!
SgtSlag
1993 Voyager XII
1993 Voyager XII
-
the2knights
- Board Member
- Posts: 223
- Joined: Sat Aug 04, 2012 1:05 pm
- 12
- Current bike(s): Current 1999 Voyager XII 1993 Voyager XII 2005 Harley Road King
Past 86 Voyager XII Honda SilverWing Honda CB900Custom Suzuki GS1000 Yamaha 80 - Location: Bloomington, IN
- Has liked: 32 times
- Been liked: 8 times
Re: Trunk Tips
Make sure you did not over tighten the trunk. I actually did that on purpose on mine since I just leave it in the rear position all the time anyways!
-
voyager55
- Elite Tourer
- Posts: 820
- Joined: Mon Aug 19, 2013 6:08 am
- 11
- Current bike(s): 2003 1200
- Location: Eden Prairie, MN
- Has liked: 1 time
- Been liked: 3 times
Re: Trunk Tips
Check the slide disk- White Disc- Not sure of the Tech name- for cracks, flat spots & wear.
I replaced mine few years ago. Cheap part if needed
Check to tightness securing the trunk. You might have it to tight so it doesn't slide properly
I replaced mine few years ago. Cheap part if needed
Check to tightness securing the trunk. You might have it to tight so it doesn't slide properly