Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
AUX LIGHTING WIRING
Moderators: the2knights, Highway Rider
-
john7845
- Newbie
- Posts: 2
- Joined: Sat Aug 16, 2014 2:22 pm
- 10
- Current bike(s): 1993 Voyager 1200
- Location: Salem, Mass
- Has liked: 0
- Been liked: 0
AUX LIGHTING WIRING
NEED TO CONNECT SO THAT THEY WORK ONLY WHEN THE LOW BEAM HEADLIGHT IS BEING USED,MASS LAW
-
ghostler
- Grand Tourer
- Posts: 519
- Joined: Fri Jun 21, 2013 5:44 pm
- 11
- Current bike(s): 2001 Voyager XII, 1971 Honda CB100
Asphalt, the final frontier; these are the treks of the Kawasaki Voyager; its continuing mission to explore strange new roads, to seek out new sites, new bed & breakfasts, to boldly ride where no one has ridden before. - Location: Clovis, NM
- Has liked: 3 times
- Been liked: 10 times
- Contact:
Re: AUX LIGHTING WIRING
By "Mass Law", do you mean Massachusetts Law? Use a 30 or 40 Amp Automobile relay. Splice one end of the relay coil to the low beam bulb's 12 Volts power wire. Ground the other end of the coil. Connect one end of the relay switch to Battery +12 Volts through an in-line fuse (10 Amp, 20 Amp, i.e., size recommended by the Aux Lighting manufacturer). Connect other end of the relay switch to the Aux Lighting +12 Volts.john7845 wrote:Need to connect so that they work only when the low beam headlight is being used, Mass Law
When low beam is switched on, electric current flows through the relay's coil, energizing it and tripping the relay's switch on. When low beam is switched off, relay de-energizes tripping the relay's switch off shutting off the Aux Lighting.
George Hostler
Clovis, NM, US
Christian Motorcycle Association
Salvation Army Motorcycle Ministry, Western Territory
http://tsammcentral.org/
2001 Kawasaki ZG1200 Voyager XII
1971 Honda CB100
Clovis, NM, US
Christian Motorcycle Association
Salvation Army Motorcycle Ministry, Western Territory
http://tsammcentral.org/
2001 Kawasaki ZG1200 Voyager XII
1971 Honda CB100