Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
need used front floorboard
Moderators: the2knights, Highway Rider
-
chrisbfishin
- Newbie
- Posts: 1
- Joined: Thu Jun 19, 2014 8:54 pm
- 10
- Current bike(s): 1987 Voyager Xll
- Location: Elk Grove, CA
- Has liked: 0
- Been liked: 0
Re: need used front floorboard
Are you still looking for front floorboards? I have a set I took off my 87 this summer. There is also a heel toe shifter with them. They have mounting brackets and the boards themselves look identical to rear boards. You do have to modify the shift linkage for these, as the shifter mounts higher than stock. So you have to turn the shift lever over on the transmission shaft and adjust it. You will also have to modify the rear brake lever, as it has to mount above the right board. All the modifications are adjustments and an adjustment to the brake lamp switch. No fabrication needed. Nothing wrong with these boards, but they were too high for me, so I went back to stock pegs, shifter, and brake lever.