Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
86 voyager xii carb cables
Moderators: the2knights, Highway Rider
-
Danimus
- Newbie
- Posts: 1
- Joined: Tue Feb 05, 2019 1:06 am
- 6
- Current bike(s): 1986 Kawasaki voyager xii zg1200-A
- Has liked: 0
- Been liked: 0
86 voyager xii carb cables
I got a new carb for my bike but I can’t seem to get the decelerations cable back on the carb. It is to tight to get the cable in the bracket. If I move the toon it all the way down I can force it in but then the throttle can’t move. Any tips? Am I doing something stupid? Please help
-
squirrel
- Streetster
- Posts: 15
- Joined: Wed Jan 23, 2019 12:53 am
- 6
- Current bike(s): r100rt bmw
- Has liked: 0
- Been liked: 0
Re: 86 voyager xii carb cables
i dont own that model so take what i say with a grain of salt.
try putting the cable you cant get on first then try the one
you can get on.
if that doesnt work mark your threaded adj with felt tip
or paint stick so you can return them to original position then
loosen the adj install cables.then tighten adj to the position
you marked
start simple as in step one,then step two.and wait for
someone thats has the model to respond.
later
squirrel
try putting the cable you cant get on first then try the one
you can get on.
if that doesnt work mark your threaded adj with felt tip
or paint stick so you can return them to original position then
loosen the adj install cables.then tighten adj to the position
you marked
start simple as in step one,then step two.and wait for
someone thats has the model to respond.
later
squirrel
-
squirrel
- Streetster
- Posts: 15
- Joined: Wed Jan 23, 2019 12:53 am
- 6
- Current bike(s): r100rt bmw
- Has liked: 0
- Been liked: 0
Re: 86 voyager xii carb cables
danimus
check the tech sections /using the search feature.
there someone with the same problem.
squirrel
check the tech sections /using the search feature.
there someone with the same problem.
squirrel