Hi,
I'm looking for a source that sells carburetor kits for a 2003 Voyager. Also does anyone have all the parts numbers for all the water hoses including the o rings. Carl Leo did this at one time, but don't know if he still does.
Thanks, Sam in central PA
570-726-3524
Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
carb kits
Moderators: the2knights, Highway Rider
-
cushman eagle
- King of the Road
- Posts: 2034
- Joined: Sat Jan 22, 2011 10:08 pm
- 14
- Current bike(s): '99 Kawasaki Voyager 1200
1958 Cushman Eagle restoration has been finished,and have put 4050 miles on her! - Location: Orrville,Ohio
- Has liked: 893 times
- Been liked: 315 times
Re: carb kits
I do not know about the carb kits,but you can find the part numbers for the o-rings and hoses on bike bandit or partzilla. 
Last I knew,not all of the hoses are available any more.
Ask Gene what he used for the head outlet hoses in Summersville.
Last I knew,not all of the hoses are available any more.
Ask Gene what he used for the head outlet hoses in Summersville.
'99 Voyager VXII,'58 Cushman Eagle
-
ekap1200
- Master Fabricator
- Posts: 1370
- Joined: Fri Jul 04, 2008 12:54 pm
- 16
- Current bike(s): 2000 voyager end of year total. 108.634
- Location: Williamstown, New Jersey
- Has liked: 33 times
- Been liked: 138 times
Re: carb kits
DAYCOcushman eagle wrote: ↑Tue Jan 21, 2020 1:17 am I do not know about the carb kits,but you can find the part numbers for the o-rings and hoses on bike bandit or partzilla.
Last I knew,not all of the hoses are available any more.
Ask Gene what he used for the head outlet hoses in Summersville.
length code D
P/N 80412
"Its not bad if you don't know something, but when you don't know you don't know; That's when your in trouble". Joe Place 1912-2008 (my grandfather)
-
lucky13
- Cruiser
- Posts: 45
- Joined: Sun Mar 15, 2020 7:09 pm
- 5
- Current bike(s): 1999 Kawasaki Voyager 1200
- Has liked: 3 times
- Been liked: 8 times
Re: carb kits
Hi. Saw your question on any carb kits for these beasts. Ebay, (Sledpartsguy..457895). Don't know what the number means but there ya go!
-
mickier
- Cruiser
- Posts: 40
- Joined: Mon Feb 24, 2020 1:34 am
- 5
- Current bike(s): 2002 Voyager XII
- Has liked: 0
- Been liked: 3 times
Re: carb kits
Some of those can be matched up by a friendly auto parts shop - if you take the old ones in (rubber hoses). Some have to be trimmed - but you can find the same diameter and similar shape.
As for the metal tubes - I was able to clean mine up and mig weld the holes and thin spots - they're still working - and of course the o-rings are super easy - just take your old ones in - NAPA matched some up for me
As for the metal tubes - I was able to clean mine up and mig weld the holes and thin spots - they're still working - and of course the o-rings are super easy - just take your old ones in - NAPA matched some up for me