Front fork oil
Moderators: the2knights, Highway Rider
-
Bulldogx11
- Cruiser
- Posts: 49
- Joined: Sun Aug 11, 2013 7:24 pm
- 11
- Current bike(s): 94 KAWASAKI VOYAGER X11
- Location: Springfield, MA
- Has liked: 1 time
- Been liked: 2 times
Front fork oil
Hi yes i have searched this out and i kno when you install progressive springs that the air gap is suppose to be 145mm /5.7 inches .. Fill with 10 wt and smaller air gap means more oil ,but i cant find the amount of oil each forks take?? Do i need more than a qt ?
-
cushman eagle
- King of the Road
- Posts: 2041
- Joined: Sat Jan 22, 2011 4:08 pm
- 14
- Current bike(s): '99 Kawasaki Voyager 1200
1958 Cushman Eagle restoration has been finished,and have put 4050 miles on her! - Location: Orrville,Ohio
- Has liked: 907 times
- Been liked: 316 times
Re: Front fork oil
Hi,Bulldogx11,The service manual calls for 391 cc per side,which is less than a qt.total. 
So you should be good with only one quart,unless you spill some
been there ,done that,especially when I change engine oil,as I often overfill the funnel 
So you should be good with only one quart,unless you spill some
been there ,done that,especially when I change engine oil,as I often overfill the funnel '99 Voyager VXII,'58 Cushman Eagle