HF Hidden Gem air mixture screw tool
Moderators: the2knights, Highway Rider
-
BackTrackBug
- Streetster
- Posts: 13
- Joined: Tue Apr 18, 2023 2:11 pm
- 2
- Current bike(s): 2002 Kawasaki Voyager XII 1200cc
- Location: Western PA
- Has liked: 18 times
- Been liked: 5 times
HF Hidden Gem air mixture screw tool
$2.99. I checked and it does fit into all four mixture screws on bottom of the bowls. May have to take chrome guard off alternator for #1 carb. But the ratchet clicks/gear is small enough that you can get atleast 2 to 3 clicks on all the screws. And if you want even more clearance it looks like you can grind the 1/4 inch socket drive off the back without effecting the operation of it. Harbor Freights screwdriver aisle, $2.99.
- Attachments
-
-
- These users liked BackTrackBug's post:
- SgtSlag (Mon May 01, 2023 6:53 pm) • Nails (Mon May 01, 2023 10:00 pm) • GrandpaDenny (Tue May 02, 2023 5:06 pm)
- Rating: 33.33%
-
SgtSlag
- King of the Road
- Posts: 1070
- Joined: Mon Oct 04, 2010 10:04 pm
- 14
- Current bike(s): 1993 Voyager XII (2010)
(2006-2012: 1979 Honda CB750K)
(2008-2010: 1983 Kawasaki 440LTD, belt drive) - Location: Minnesota
- Has liked: 23 times
- Been liked: 249 times
Re: HF Hidden Gem air mixture screw tool
Could have used this post a few years ago... There are times when such a screw driver is the only tool that will work. Need to visit my local HF. Thanks for sharing. 
Cheers!
Cheers!SgtSlag
1993 Voyager XII
1993 Voyager XII
-
Nails
- King of the Road
- Posts: 1826
- Joined: Thu Feb 16, 2017 4:37 pm
- 8
- Current bike(s): '97 XII
'00 XT350
'85 KLR 250
'82 Silverwing Sushiguzzi - Location: New Mexico Rockies
- Has liked: 240 times
- Been liked: 624 times
Re: HF Hidden Gem air mixture screw tool
I still recommend etching the carb body and using a dentist mirror to monitor that the screw actually turns.
--
Nails
Nails
-
BackTrackBug
- Streetster
- Posts: 13
- Joined: Tue Apr 18, 2023 2:11 pm
- 2
- Current bike(s): 2002 Kawasaki Voyager XII 1200cc
- Location: Western PA
- Has liked: 18 times
- Been liked: 5 times
Re: HF Hidden Gem air mixture screw tool
Yup. I used my engraver and etched a small line where the screw bottoms out.I can see how easy it would be to become totally clueless if your one turn out or 4 quickly. That is a good idea Nails. And I have a dental mirror on my " things I need" list for the XII.