Partdiscounter Experience

This is for general posts and questions concerning only the Voyager XII (1200cc, Four-cylinder) Years 1986 thru 2003.

Moderators: the2knights, Highway Rider

Post Reply
User avatar
glvnthedream
Cruiser
Cruiser
Posts: 65
Joined: Fri Apr 21, 2023 8:06 pm
1
Current bike(s): 2002 Kawasaki Voyager XII 1200
Has liked: 46 times
Been liked: 14 times

Partdiscounter Experience

Post by glvnthedream »

I am searching for Brake discs for my 2002 Voyager and found https://partdiscounter.com/ with incredible prices for both front and back discs. Has anyone used this site in the past? If so, what was your experience? All my discs are at the minimum service limits and according to my cart I can get all 3 for &150 US Dollars.

On another note, has anyone found aftermarket brake calipers that can be used?

Thanks in advance

Regards

Greg
King George VA
User avatar
Van Voyager
Grand Tourer
Grand Tourer
Posts: 430
Joined: Wed Aug 30, 2017 8:01 am
6
Current bike(s): 1986 Kawasaki ZN1300 Voyager
Has liked: 43 times
Been liked: 37 times

Re: Partdiscounter Experience

Post by Van Voyager »

Following ....
These users liked Van Voyager's post:
glvnthedream (Tue Oct 31, 2023 11:11 pm)
Rating: 12.5%
User avatar
GrandpaDenny
Elite Tourer
Elite Tourer
Posts: 986
Joined: Fri Nov 01, 2019 4:24 pm
4
Current bike(s): Temporarily none.
Has liked: 430 times
Been liked: 391 times

Re: Partdiscounter Experience

Post by GrandpaDenny »

I get EBC brakes from Amazon, organics are around $90 for all three calipers. Sintered metallics are just a little bit higher, maybe ten bucks, I didn't look.
These users liked GrandpaDenny's post:
glvnthedream (Wed Nov 01, 2023 5:19 pm)
Rating: 12.5%
Dennis Fariello
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased

South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders

Voyager XII Manuals:
https://amervoyassoc.org/zg1200manuals.php
User avatar
Nails
King of the Road
King of the Road
Posts: 1668
Joined: Thu Feb 16, 2017 4:37 pm
7
Current bike(s): '97 XII
'00 XT350
'85 KLR 250
'82 Silverwing Sushiguzzi
Location: New Mexico Rockies
Has liked: 204 times
Been liked: 544 times

Re: Partdiscounter Experience

Post by Nails »

I bought brakes and lines from Don. Work swell. https://www.amervoyassoc.org/forum/memb ... file&u=239
--
Nails
User avatar
Scott-(Altoona, PA)
King of the Road
King of the Road
Posts: 1058
Joined: Mon Feb 18, 2008 1:22 pm
16
Current bike(s): 2001 Voyager XII
Location: Altoona, PA
Has liked: 80 times
Been liked: 121 times
Contact:

Re: Partdiscounter Experience

Post by Scott-(Altoona, PA) »

GrandpaDenny wrote: Wed Nov 01, 2023 10:12 am I get EBC brakes from Amazon, organics are around $90 for all three calipers. Sintered metallics are just a little bit higher, maybe ten bucks, I didn't look.
Denny, I beleive he is talking about the rotors (disc's), not the brake pads.
These users liked Scott-(Altoona, PA)'s post:
Nails (Wed Nov 01, 2023 6:37 pm) • GrandpaDenny (Thu Nov 02, 2023 5:13 pm)
Rating: 25%
Mid-Atlantic Voyagers chapter secretary {"scribe"}
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!
User avatar
Scott-(Altoona, PA)
King of the Road
King of the Road
Posts: 1058
Joined: Mon Feb 18, 2008 1:22 pm
16
Current bike(s): 2001 Voyager XII
Location: Altoona, PA
Has liked: 80 times
Been liked: 121 times
Contact:

Re: Partdiscounter Experience

Post by Scott-(Altoona, PA) »

glvnthedream wrote: Tue Oct 31, 2023 2:22 pm I am searching for Brake discs for my 2002 Voyager and found https://partdiscounter.com/ with incredible prices for both front and back discs. Has anyone used this site in the past? If so, what was your experience? All my discs are at the minimum service limits and according to my cart I can get all 3 for &150 US Dollars.
On another note, has anyone found aftermarket brake calipers that can be used?
Thanks in advance
Regards
Greg
King George VA
Greg, I know from my own experience when I was searching for a rear rotor/disc they get a bit pricy depending on the source. I would say $40 for each front and $70 for the rear isn't bad at all. Thanks for the tip!

As for you question about aftermarket calipers, I'm pretty sure I've read somewhere on here that someone swapped out from one bike to another but not sure about aftermarket units. I'm sure someone makes one that fits. Keep us posted on your search/findings!
These users liked Scott-(Altoona, PA)'s post:
glvnthedream (Wed Nov 01, 2023 5:22 pm)
Rating: 12.5%
Mid-Atlantic Voyagers chapter secretary {"scribe"}
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!
User avatar
glvnthedream
Cruiser
Cruiser
Posts: 65
Joined: Fri Apr 21, 2023 8:06 pm
1
Current bike(s): 2002 Kawasaki Voyager XII 1200
Has liked: 46 times
Been liked: 14 times

Re: Partdiscounter Experience

Post by glvnthedream »

Thanks. I have no problems finding pads, I am looking for NEW calipers and the discs (rotors). The prices I found on the partsdiscounter site are incredible compared to $100+ each which is what I am finding the norm.


GrandpaDenny wrote: Wed Nov 01, 2023 10:12 am I get EBC brakes from Amazon, organics are around $90 for all three calipers. Sintered metallics are just a little bit higher, maybe ten bucks, I didn't look.
User avatar
glvnthedream
Cruiser
Cruiser
Posts: 65
Joined: Fri Apr 21, 2023 8:06 pm
1
Current bike(s): 2002 Kawasaki Voyager XII 1200
Has liked: 46 times
Been liked: 14 times

Re: Partdiscounter Experience

Post by glvnthedream »

Thanks, Scott.

Yep, I am going to jump on the deal and will report my results r/discs. I was assured by the support on the site that they are exact fit. I will be continuing my search for the calipers

Cheers


Scott-(Altoona, PA) wrote: Wed Nov 01, 2023 2:45 pm
glvnthedream wrote: Tue Oct 31, 2023 2:22 pm I am searching for Brake discs for my 2002 Voyager and found https://partdiscounter.com/ with incredible prices for both front and back discs. Has anyone used this site in the past? If so, what was your experience? All my discs are at the minimum service limits and according to my cart I can get all 3 for &150 US Dollars.
On another note, has anyone found aftermarket brake calipers that can be used?
Thanks in advance
Regards
Greg
King George VA
Greg, I know from my own experience when I was searching for a rear rotor/disc they get a bit pricy depending on the source. I would say $40 for each front and $70 for the rear isn't bad at all. Thanks for the tip!

As for you question about aftermarket calipers, I'm pretty sure I've read somewhere on here that someone swapped out from one bike to another but not sure about aftermarket units. I'm sure someone makes one that fits. Keep us posted on your search/findings!
User avatar
glvnthedream
Cruiser
Cruiser
Posts: 65
Joined: Fri Apr 21, 2023 8:06 pm
1
Current bike(s): 2002 Kawasaki Voyager XII 1200
Has liked: 46 times
Been liked: 14 times

Re: Partdiscounter Experience

Post by glvnthedream »

I pulled the trigger on the discs. Partzilla has the REAR and FRONT Discs listed for $416.00 EACH.
Brakerotors.jpg
User avatar
GrandpaDenny
Elite Tourer
Elite Tourer
Posts: 986
Joined: Fri Nov 01, 2019 4:24 pm
4
Current bike(s): Temporarily none.
Has liked: 430 times
Been liked: 391 times

Re: Partdiscounter Experience

Post by GrandpaDenny »

Scott-(Altoona, PA) wrote: Wed Nov 01, 2023 2:39 pm
GrandpaDenny wrote: Wed Nov 01, 2023 10:12 am I get EBC brakes from Amazon, organics are around $90 for all three calipers. Sintered metallics are just a little bit higher, maybe ten bucks, I didn't look.
Denny, I beleive he is talking about the rotors (disc's), not the brake pads.
Oh you are absolutely right. $150 for NEW discs, all three of them, is an astounding deal. One thing I wonder if at that price are they iron or stainless steel? OEM discs are stainless steel.
Dennis Fariello
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased

South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders

Voyager XII Manuals:
https://amervoyassoc.org/zg1200manuals.php
User avatar
glvnthedream
Cruiser
Cruiser
Posts: 65
Joined: Fri Apr 21, 2023 8:06 pm
1
Current bike(s): 2002 Kawasaki Voyager XII 1200
Has liked: 46 times
Been liked: 14 times

Re: Partdiscounter Experience

Post by glvnthedream »

Confirmed with support that they are Stainless Steel.

Have to give them Kudos for support too, along with the prices. They have been very responsive. Wish they had more XII Parts available.


GrandpaDenny wrote: Thu Nov 02, 2023 5:12 pm
Scott-(Altoona, PA) wrote: Wed Nov 01, 2023 2:39 pm
GrandpaDenny wrote: Wed Nov 01, 2023 10:12 am I get EBC brakes from Amazon, organics are around $90 for all three calipers. Sintered metallics are just a little bit higher, maybe ten bucks, I didn't look.
Denny, I beleive he is talking about the rotors (disc's), not the brake pads.
Oh you are absolutely right. $150 for NEW discs, all three of them, is an astounding deal. One thing I wonder if at that price are they iron or stainless steel? OEM discs are stainless steel.
These users liked glvnthedream's post:
Scott-(Altoona, PA) (Fri Nov 03, 2023 12:52 pm) • cushman eagle (Sat Nov 04, 2023 12:10 am)
Rating: 25%
User avatar
GrandpaDenny
Elite Tourer
Elite Tourer
Posts: 986
Joined: Fri Nov 01, 2019 4:24 pm
4
Current bike(s): Temporarily none.
Has liked: 430 times
Been liked: 391 times

Re: Partdiscounter Experience

Post by GrandpaDenny »

glvnthedream wrote: Fri Nov 03, 2023 2:24 am Confirmed with support that they are Stainless Steel.

Have to give them Kudos for support too, along with the prices. They have been very responsive. Wish they had more XII Parts available.


Cool. Let us know how they work out!
These users liked GrandpaDenny's post:
glvnthedream (Fri Nov 03, 2023 3:15 pm) • Scott-(Altoona, PA) (Fri Nov 03, 2023 6:35 pm)
Rating: 25%
Dennis Fariello
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased

South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders

Voyager XII Manuals:
https://amervoyassoc.org/zg1200manuals.php
User avatar
glvnthedream
Cruiser
Cruiser
Posts: 65
Joined: Fri Apr 21, 2023 8:06 pm
1
Current bike(s): 2002 Kawasaki Voyager XII 1200
Has liked: 46 times
Been liked: 14 times

Re: Partdiscounter Experience

Post by glvnthedream »

UPDATE: Posting just to give kudos to the website again. Submitted my order on November 1st. Today, November 4th they have arrived. I am in Virginia.
IMG_0482-2.jpg
IMG_0481-1.jpg
These users liked glvnthedream's post:
Stew (Sat Nov 04, 2023 7:26 pm) • cushman eagle (Sun Nov 05, 2023 12:09 am)
Rating: 25%
User avatar
GrandpaDenny
Elite Tourer
Elite Tourer
Posts: 986
Joined: Fri Nov 01, 2019 4:24 pm
4
Current bike(s): Temporarily none.
Has liked: 430 times
Been liked: 391 times

Re: Partdiscounter Experience

Post by GrandpaDenny »

They look raw to me, do they need to be cut? Never having seen brand-new rotors, I could easily be wrong, though.
Dennis Fariello
Philadelphia, PA
2000 Voyager XII "Gertrude" - deceased

South Jersey Retreads
Patriot Guard Riders
Warriors Watch Riders

Voyager XII Manuals:
https://amervoyassoc.org/zg1200manuals.php
User avatar
glvnthedream
Cruiser
Cruiser
Posts: 65
Joined: Fri Apr 21, 2023 8:06 pm
1
Current bike(s): 2002 Kawasaki Voyager XII 1200
Has liked: 46 times
Been liked: 14 times

Re: Partdiscounter Experience

Post by glvnthedream »

They are indeed Raw. Are there preps needed before installing and riding with them? Thanks in advance
IMG_0486-1.jpg



GrandpaDenny wrote: Sun Nov 05, 2023 12:28 am They look raw to me, do they need to be cut? Never having seen brand-new rotors, I could easily be wrong, though.
User avatar
Van Voyager
Grand Tourer
Grand Tourer
Posts: 430
Joined: Wed Aug 30, 2017 8:01 am
6
Current bike(s): 1986 Kawasaki ZN1300 Voyager
Has liked: 43 times
Been liked: 37 times

Re: Partdiscounter Experience

Post by Van Voyager »

glvnthedream wrote: Sun Nov 05, 2023 4:07 pm They are indeed Raw. Are there preps needed before installing and riding with them? Thanks in advance
Clean with a high flash point solvent and sent it.
User avatar
glvnthedream
Cruiser
Cruiser
Posts: 65
Joined: Fri Apr 21, 2023 8:06 pm
1
Current bike(s): 2002 Kawasaki Voyager XII 1200
Has liked: 46 times
Been liked: 14 times

Re: Partdiscounter Experience

Post by glvnthedream »

So clean well with brake cleaner and should be good??

Van Voyager wrote: Sun Nov 05, 2023 7:18 pm
glvnthedream wrote: Sun Nov 05, 2023 4:07 pm They are indeed Raw. Are there preps needed before installing and riding with them? Thanks in advance
Clean with a high flash point solvent and sent it.
User avatar
Van Voyager
Grand Tourer
Grand Tourer
Posts: 430
Joined: Wed Aug 30, 2017 8:01 am
6
Current bike(s): 1986 Kawasaki ZN1300 Voyager
Has liked: 43 times
Been liked: 37 times

Re: Partdiscounter Experience

Post by Van Voyager »

glvnthedream wrote: Sun Nov 05, 2023 8:56 pm So clean well with brake cleaner and should be good??

That's what I'd use.
User avatar
VoyKimmer
Grand Tourer
Grand Tourer
Posts: 515
Joined: Mon Mar 03, 2008 12:47 am
16
Current bike(s): 2002 Voyager XII
1996 Voyager XII
Location: Gurnee, Illinois
Has liked: 0
Been liked: 98 times

Re: Partdiscounter Experience

Post by VoyKimmer »

All brands look like that new. My EBC’s looked like that before I chromed them and have worked good for several years.
User avatar
glvnthedream
Cruiser
Cruiser
Posts: 65
Joined: Fri Apr 21, 2023 8:06 pm
1
Current bike(s): 2002 Kawasaki Voyager XII 1200
Has liked: 46 times
Been liked: 14 times

Re: Partdiscounter Experience

Post by glvnthedream »

Chromed them? Explain will you please.

Thanks
VoyKimmer wrote: Mon Nov 06, 2023 3:41 am All brands look like that new. My EBC’s looked like that before I chromed them and have worked good for several years.
Post Reply

Return to “General - Voyager XII (1200 Four)”