Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Starting to get rid of some Voyager XII stuff have a complete CB with antenna and bracket , other stuff . Will be listing on the Classifieds. Wanted...
When I start my Voyager it sounds like the engine is getting hit with a hammer when revved up cold. After warm up it looses the banging but still...
Last post
First thing to check would be the oil level. I've heard that if there is too much oil that can cause the lifters to somewhat hydraulically lock which...
Has anyone put dual piston caliper on their 1200 out there. I want better more powerful brakes. I am going to go with stainless lines but that still...
Last post
Thanks everyone, I'm happy you like the stainless steel brake lines. I have them in stock, in two colors, black and clear. The clear have a UV clear...
I would like to know what would be a good stop and brake light LED bar for the rear of our 1200s. Does anyone have a picture or 2 they would share. I...
Last post
Here is an item you might be interested in
I have one on both my Voyagers.
Also if you get the right LED bulbs they are brighter then the regular...
The only bolt I used Loctite on was the one in the JB Weld. I ALWAYS use anti seize on steel to aluminum bolts. Nothing left to put a helicoil in it...
My problem is that the bike will start but will shut off withou notice. If i turn the steering wheel it shuts off but not all the time. The bike...
Last post
I wanted to thanks those for the advice. I was able to get it fixed today. My fat fingers were not able to crimp the wire together so my 17 year old...
Does anyone here know where to get an Avon Venom 130/90 16 bias tire for the front of my Xll? I like to run Avon's, and I recently purchased one for...
Last post
Thanks Gene. I've been thinking about the Cobra. Good to hear some first hand info on it.
I went to replace all my brake pads when I noticed the top bolt on the front left caliper is completely rounded. :tho: it is tucked right in between...
Last post
That happened to me too. I took the tire and caliper off, leaving the black bracket on. Sawzall the black bracket where the bolt goes in. Ordered...
Reading and searching past posts led me to the 10 plug. (Intermittent losing of everything except radio) Problem is my 10 plug appears to be buried....
Last post
If you unbolt the fuse block you should be able to pull the wire out so you can get to the plug better.
When you are finished and reassemble the plug...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
