Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
OK, what is the secret to installing them!!!! I finally got some foot pegs that go out
far enough that I think I can run with them on, and wanted to try for winter...
Boy Howdy!!! These things are a piece'a work!!! GBG How do you get the
springs to bite????!!!! TIA!!!
'03 Voyager - http://tinyurl.com/mqtgpwp VROC pics of Gina
Cranky - Bill Snodgrass AVA # 6544. VROC # 16804
Cranked >128K miles, Mtn bike-no motor!!!
San Jose, KalEfornYa
When I lost (recovered it and removed the other side) one of my lowers I contacted Carl Leo and asked about the clips because I couldn't get them to re-attach. He basically said the clips are a "one and done" use, once used they are crap and you need to get new clips. So I just put the 2 lowers in a bag and have ran without them for 10 years now.
Not sure what the part number is but they can't be that expensive, probably have to purchase a dozen of them at a time!
Mid-Atlantic Voyagers chapter secretary {"scribe"} 2001 Voyager XII We may not know them all, but we owe them all! Thank a Veteran today!
Yes,cranky,I finally found the part number for those clips on the partzilla site.I found them under the page for cowling,and the number is 92037-1943 for $2.95 each.
I hope this helps.
... thanks for the info!!!! My ? was at a much simpler level tho...
How do you get the clips to grip/attach to the edge of the fairing?
I made a few pheeble attempts and thought I'd thro it out for some
laughs... GBG I'd like to try 'um to see if they interfere before
ording new clips.. Thanks again for all your help!!!!!
'03 Voyager - http://tinyurl.com/mqtgpwp VROC pics of Gina
Cranky - Bill Snodgrass AVA # 6544. VROC # 16804
Cranked >128K miles, Mtn bike-no motor!!!
San Jose, KalEfornYa
cranky wrote: ↑Sun Nov 10, 2019 2:00 pm
... thanks for the info!!!! My ? was at a much simpler level tho...
How do you get the clips to grip/attach to the edge of the fairing?
I made a few pheeble attempts and thought I'd thro it out for some
laughs... GBG I'd like to try 'um to see if they interfere before
ording new clips.. Thanks again for all your help!!!!!
I had one of mine fall off several years ago,and happened to find it in my brothers driveway
With good clips,it will fasten on securely.