Hi, All!
I was driving my cage down a local street, and saw a V17 sitting in front of a 'Ma & Pa' type car dealership. Being curious, I went in to...
Last post
It shakes a little due to it being a V twin , probably engineered by MaKaw to give it character (lol). It really doesn't shake much in comparison to...
After 4 years and 2 different XII's, I'm considering buying a new motorcycle. I'm wondering what you guys have to say on the Victory Cross Country...
Last post
Being a VV 1700 owner and having ridden several Victorys (the Victory dealer loves to let you demo their bikes). I would have to say that the Victory...
I have a 2012 Voyager. The '96 XII I had a Russel Day Long seat and was the most comfortable seat I ever had, we could ride 6-8 hours with no problem...
Last post
The pillowtop gel seat is firmer than the OEM seat and will sit you up higher as well. I like it, but your results could vary.
I'm borrowing this from another board since I thought you might enjoy. The post is in green font below Actually come to think about it I used to...
Last post
I learned long ago that the kitchen is sacred ground. I wonder how that guy would feel if his wife went into his shop and started using his tools for...
My local dealer has a 15% off parts and labor. With their already reasonable rates and the fact that they've installed one KAMS kit already in about...
Last post
That cover is plastic, which CAN be chromed...... contact your local chrome plater, he can do it, but don't know what it would cost, you would...
I now know how to load pictures so here are some of my day at Corbin having my new seat made[IMG
this is the stock seat being removed
Trying to...
Last post
I'm only 5'9 and very short inseam 29 , yes I had them move me forward about 2 and the same with the back rest. I also installed 2 risers, and moved...
Have heard other folks speak of this, What I discovered is that the chrome ring around the headlight rattles when you bump it. Might be something to...
Last post
When I had my fairing apart I checked all the fasteners that are in there and discovered that the fasteners that hold the instrument cluster were...
have a 2012 voyager 1700. whe n starting to ric
de and getting up to 30 nto 50 mph i get a rotating scraping noise from the front sounds just like...
Last post
I've got to go with 1700Guy's probable cause. Same thing happened to me. Maintaining proper axle spacing on front end is critical to brake longevity...
OK, the kit is installed, went for a 15 mile drive in traffic in 95 degree heat. Here is what I found. Although the kit does not kill ALL the heat,...
Last post
The reason I mentioned the Cats is because they DO generate heat, (that is how they work) and there is no place for all that heat to go when you are...
I was on fumes this last fill up. When on the side stand it always appeared there was room for more fuel. So after filling to the neck while on side...
Last post
Anyone seen the old Seinfeld episode where Kramer drove to the left of E to see what that world was like? It's like a forbidden place that calls to...
This morning I had to be in San Francisco at 6:15 am to ride moto support for the SF Alcatraz Trilithon. I was able to ride over Hwy 92 which is a...
Last post
I agree with you Don, the more I tweak the Voyager 1700 the more I like it. It really is a fun bike to ride and the engine reminds me of the pulling...
I realize this is a cruiser-styled touring bike but would like to know if/how the front end handling can be improved. The front end wallows in higher...
Last post
If you are only 150 lbs and do not carry gear the recommended rear shock pressure for you is 0 PSI. So, by adding the extra air you are raising the...
The Original rear tire on a 2009 or newer Voyager is 170/70/16
Size -------------...
Last post
I saw a Vulcan Voyager at Niehaus with this tire on the rear and a Dunlop 402 on the front (it said Harley Davidson on the side wall , but they offer...
I got the left floorboard moved back 3 1/2 inchs, it wasn't bad. But it sure makes riding the Voyager much better then before. I've logged over 1,000...
Last post
Here we are, the first picture is the stock location of the right floorboard. See how are the floorboard extends onto the lower faring
Well, I've been looking at the VV1700 for three years and finally decided to get a Black/gray with ABS. Sad to see my 96 go after 16 years of...
Last post
Well, I've had my Voyager for almost 2 weeks now, wow what a different ride. The ABS are awesome were well worth the wait, very strong and good feel....
I just took the 1700 in for the 15k/2year service and got a huge shock when my dealer told me 4 hours of labor just to lube the steering and trailing...
Last post
thanks Dave, my next project....swing arm maint...spark plugs and all the coolant hoses and t-stat...sprins a comming...get ready
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
