Got a tech tip for Voyager 12's from your personal experiences, or one complete with pictures and instructions, here's where to post it. You can also ask about tips or procedures here.
Do the handlebar grip weights on the XII use loctite? How does one unscrew and remove them?
Greg :hmm:
Last post
When you replace the screws, use a light coating of blue loctite on the whole screw, instead of just a dab in one spot. This will help keep the screw...
With winter here, it's maintenance time, and I was thinking of replacing the antifreeze. I thought I'd first see what new wisdom I might find on the...
Last post
This is from a Ford TSB regarding heater core leakage on certain specific vehicles. Generally, it's not something to get worried about. That is,...
It's my turn with ignition switch wires going bad. The last couple months, and usually only with the bike cold, the whole bike would...
Last post
Mine only did it 4 or 5 times. Whenever it did it, it was instantaneous off, then on. You could move the handlebars back and forth 10 times after it...
So I don't suppose you wish to share the Stock #s and phone # of the place you got these Teflon coated fork seals and wipers to reduce stiction. (And...
Last post
Maybe when you get the time and your glasses, you could post the part #s and the web link. I'm sure there are Voyager owners that would appreciate...
1. What is the easiest way to remove and replace the speedometer cable , particularly at the upper end (under the speedometer housing)? Must I first...
Last post
Make 2 statements-- arrive at your polling station on 2 wheels. (Seen years ago prior to an election)
Putting the bike away for the season and want to drain the carbs ? Any trick to it or just loosen the screw on the bottom of the carbs(I don't think...
Last post
Hey Bill...
:hmm: There's no special trick to draining the carbs...just loosen the screw and have a container handy to catch the gas. There is a...
When sending the CB radio to Clarion for repair, do you have to send every component or can you send just the main unit and the CB controller unit on...
Last post
:thmup: Thanks to all who replied. Disconnecting the battery worked! :clap: Everything works now. Gary, you may want to add this information to the...
Saturday my speedometer quit working, so Sunday I pulled the headlight to check to see if it had become disconnected from the gauge cluster, but...
Last post
My speedometer stopped working on my 2001 Voyager coming back from Idaho. When I returned home I noticed in the Voyager's Voice there was an article...
Hi, I meet a fellow XII rider in my area who rides a 91 1200. He plans to join the AVA. He has a problem with the headlight on his bike and ask me if...
Last post
have him check the adjustment knob, someone could have turned it to the point that it is completely out of whack or it may have become...
I did 505 miles in the last 24 hours going to a training class and coming home afterwards. Their has been a squeak in the front end area since I have...
Last post
Had an older Clearview with the thicker plastic. Did not have the screws that are between the middle and outer attaching points. Had the middle two,...
Hope someone can offer some advice. The last two times I have ridden my 92 Voyager as far as 40 miles it has blown a radiator hose in my driveway as...
Last post
Thanks a lot. I will check that out as soon as I can.
Hi Folks,
I'm looking for clutch discs and plates if you think I need them for a 86 ZG1200 A1. I also am interested in brake rotors. One question I...
Last post
... I thought for some reason they made them paint the inside of the lenses...
flip you are correct, both sides of the lenses are painted. Strip the...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
