Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
fork seals
Moderators: the2knights, Highway Rider
-
wsm 1
- Traveler
- Posts: 173
- Joined: Wed Jun 15, 2016 5:04 pm
- 8
- Current bike(s): 1998 gl 1500 SE 2002 voyager xii
- Has liked: 0
- Been liked: 0
fork seals
Just bought all ball bearing fork seals and dust covers.Going to replace front springs with progressive springs,anything else I should get?
-
timmerz_1
- Cruiser
- Posts: 72
- Joined: Wed Jun 15, 2016 7:32 pm
- 8
- Current bike(s): 2000 Honda XR650R
1989 Kawasaki Voyager XII - Location: Manteca, Ca
- Has liked: 0
- Been liked: 1 time
Re: fork seals
You're right...we are on exactly the same path! 
Having mine done by a local mech next weekend, I think...got all the parts already...the springs came in a much smaller box that I expected, about 25"...sure hope I got the right ones!
I'm also doing the 23-tooth speedo gear and pinion retrofit to correct a huge 12 mph error on my bike while he's got the front end torn apart...
Having mine done by a local mech next weekend, I think...got all the parts already...the springs came in a much smaller box that I expected, about 25"...sure hope I got the right ones!
I'm also doing the 23-tooth speedo gear and pinion retrofit to correct a huge 12 mph error on my bike while he's got the front end torn apart...