Mirror Backing

This is for general posts and questions concerning only the Voyager 1300 Six-Cylinder.

Moderators: the2knights, Highway Rider

Post Reply
User avatar
Van Voyager
Grand Tourer
Grand Tourer
Posts: 435
Joined: Wed Aug 30, 2017 8:01 am
7
Current bike(s): 1986 Kawasaki ZN1300 Voyager
Has liked: 46 times
Been liked: 40 times

Mirror Backing

Post by Van Voyager »

I read in the tips section that the mirrors can crack if they get really cold. Mine aren't cracked but the mirroring seems to be coming off the back (or is that what they meant by 'cracked'?). Has anyone had their mirrors re-silvered (not sure that's the right term). Are the mirrors actually glass or plastic?
User avatar
Mr Jensee
King of the Road
King of the Road
Posts: 1987
Joined: Fri Dec 26, 2008 5:55 pm
15
Current bike(s): Phone 337-781-8158
Home Phone disconnected.
Previous bikes. Yamaha 180, Honda CM200T, Suzuki 1000LNKawasaki ZRX1100.
Location: Lafayette, La
Has liked: 0
Been liked: 9 times

Re: Mirror Backing

Post by Mr Jensee »

Van if you gently remove the mirror from the plastic housing, it can be done but be gentle when prying them apart. You can take the mirror down to any glass business and they can for pennies cut you another mirror to put in it's place. I did this the when I got my Voyager and the mirror in the trunk was broken. I think it cost me like $3. Then use the RTV black silicone to glue the pieces back together. Use rubber bands to hold the pieces back together till dry.
For Voyager XII Manuals click the link below.
https://1drv.ms/f/s!Ao3K0Ai2gvglgS3l7J4pBJrjfBhc
User avatar
Van Voyager
Grand Tourer
Grand Tourer
Posts: 435
Joined: Wed Aug 30, 2017 8:01 am
7
Current bike(s): 1986 Kawasaki ZN1300 Voyager
Has liked: 46 times
Been liked: 40 times

Re: Mirror Backing

Post by Van Voyager »

Thanks for the suggestion MJ.
Post Reply

Return to “General - Voyager 1300 Six”