(ie. shop , Man-Cave )
Next up will be setting up a pay pay account and getting back to work on other trim items out of stainless 0.048" ...
After that is ; this garmin unit is wired up and the last two doors for the house are sprayed and installed.
Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
GARMIN III. another mount option
Moderators: the2knights, Highway Rider
-
ekap1200
- Master Fabricator
- Posts: 1370
- Joined: Fri Jul 04, 2008 12:54 pm
- 16
- Current bike(s): 2000 voyager end of year total. 108.634
- Location: Williamstown, New Jersey
- Has liked: 33 times
- Been liked: 138 times
GARMIN III. another mount option
Hello from now cold and windy New Jersey. Great time of the year if you want to work INSIDE. So here are some pics of just another way of installing your Garmin without drilling any hole's. I just purchased a used garmin-3 and didn't like the mount system. PO had it installed on a G-Wing and I just hate drilling holes in expensive plastic. With just replacing the stock screws with 4mm-.7 x 25mm long screws this seems to work out. There two inserts for the oem screw/counter bores and a rubber gasket under this bracket so there is no way you would know it was there , if removed for resale. Plus I just like the position of where I have it mounted now. With needed home repairs and other family and health , issues finally winding down I have more free time in my home away from home
(ie. shop , Man-Cave )
Next up will be setting up a pay pay account and getting back to work on other trim items out of stainless 0.048" ...
After that is ; this garmin unit is wired up and the last two doors for the house are sprayed and installed.
(ie. shop , Man-Cave )
Next up will be setting up a pay pay account and getting back to work on other trim items out of stainless 0.048" ...
After that is ; this garmin unit is wired up and the last two doors for the house are sprayed and installed.
"Its not bad if you don't know something, but when you don't know you don't know; That's when your in trouble". Joe Place 1912-2008 (my grandfather)
-
Pbpd183
- Cruiser
- Posts: 79
- Joined: Fri Aug 08, 2014 10:29 pm
- 10
- Current bike(s): 2010 Voyager 1700
- Location: Palm Bay, Florida
- Has liked: 0
- Been liked: 1 time
Re: GARMIN III. another mount option
As alway Gene, NICE WORK!!!! 
Dan
2010 Voyager 1700
Palm Bay, Florida
Previous
2000 Voyager 1209
2010 Voyager 1700
Palm Bay, Florida
Previous
2000 Voyager 1209
-
Lucasind
- King of the Road
- Posts: 1793
- Joined: Mon Dec 17, 2012 5:44 pm
- 12
- Current bike(s): 2003 Voyager 1200
1988 Voyager 1200
1985 Voyager 1300
2008 Concourse 1400
1985 LTD 1100
1981 CSR 1000
1981 CSR 650
1979 KZ 650
1973 XL 350
1988 Eliminator
1975 CB 125
1965 S 65
and a bunch of parts ! - Location: Toledo, OH
- Has liked: 203 times
- Been liked: 72 times
Re: GARMIN III. another mount option
....Glad to see ya back making posts again Gene, Do I see 72k odo reading ,on the 00 XII, you found some time to ride this year,other than the rally
90% OF ANY JOB ...IS GETTING STARTED !
-
ekap1200
- Master Fabricator
- Posts: 1370
- Joined: Fri Jul 04, 2008 12:54 pm
- 16
- Current bike(s): 2000 voyager end of year total. 108.634
- Location: Williamstown, New Jersey
- Has liked: 33 times
- Been liked: 138 times
Re: GARMIN III. another mount option
Lucasind wrote:....Glad to see ya back making posts again Gene, Do I see 72k odo reading ,on the 00 XII, you found some time to ride this year,other than the rally
Yes I did, road to work every day even in the rain. This pic shows the mileage from Jan. 2014 ... Good thing I have 3 cats to keep the rodents out of the engine compartment of my pic-up, its been sitting for some time . Unless I need it to haul something. A few 300 mile days but other than Ashville not many really long stays in the saddle. I may get to get a few more rides in but not much over 8k this year on the 1200. Time to spend hours of fun time in the shop now until Feb. Gene
"Its not bad if you don't know something, but when you don't know you don't know; That's when your in trouble". Joe Place 1912-2008 (my grandfather)
-
Scott-(Altoona, PA)
- King of the Road
- Posts: 1112
- Joined: Mon Feb 18, 2008 1:22 pm
- 17
- Current bike(s): 2001 Voyager XII
- Location: Altoona, PA
- Has liked: 88 times
- Been liked: 153 times
- Contact:
Re: GARMIN III. another mount option
Always thinking, that's the Gene we all love!
Keep those creative juices flowing my friend.
Keep those creative juices flowing my friend.
Mid-Atlantic Voyagers chapter secretary {"scribe"}
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!
2001 Voyager XII
We may not know them all, but we owe them all! Thank a Veteran today!
