Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Fuel pump hose routing
Moderators: the2knights, Highway Rider
-
MartinKemp
- Streetster
- Posts: 24
- Joined: Fri Apr 07, 2017 5:11 pm
- 8
- Has liked: 0
- Been liked: 0
Fuel pump hose routing
Does it matter which way the fuel hoses go onto the pump? I can't find an "inlet" stamp on the new pump I purchased (or the old pump), and I wasn't smart enough to mark the hoses when I removed the old pump.
-
Chris near Kansas City
- Elite Tourer
- Posts: 645
- Joined: Mon Feb 18, 2008 3:01 am
- 17
- Location: Do I have to spell it out for you?
- Has liked: 0
- Been liked: 1 time
Re: Fuel pump hose routing
As mounted on the bike and looking at the end of the pump, the nipples should be around the 9 and 7 o'clock position. The 9 o'clock goes to the filter.
"You only live twice, or so it seems. One life for yourself and one for your dreams...." Nancy Sinatra
"If a man made it, a man can fix it." - Steve in Sunny Fla
"If a man made it, a man can fix it." - Steve in Sunny Fla
-
MartinKemp
- Streetster
- Posts: 24
- Joined: Fri Apr 07, 2017 5:11 pm
- 8
- Has liked: 0
- Been liked: 0
Re: Fuel pump hose routing
That was helpful Chris. Installed as suggested and the bike started immediately and runs as hoped (in the shop). Test drive time. Many thanks. Saved me a bunch of time, effort and frustration.
Best regards,
Martin
Calgary, Alberta, Canada
Best regards,
Martin
Calgary, Alberta, Canada
-
Chris near Kansas City
- Elite Tourer
- Posts: 645
- Joined: Mon Feb 18, 2008 3:01 am
- 17
- Location: Do I have to spell it out for you?
- Has liked: 0
- Been liked: 1 time
Re: Fuel pump hose routing
I couldn't remember for sure, and was toooo lazy to go downstairs to the garage to actually look at mine. So I looked up fuel pumps on ebay and there were several pump/filter/bracket assemblies on there.
"You only live twice, or so it seems. One life for yourself and one for your dreams...." Nancy Sinatra
"If a man made it, a man can fix it." - Steve in Sunny Fla
"If a man made it, a man can fix it." - Steve in Sunny Fla