Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
1987 Voyager VII
Moderators: the2knights, Highway Rider
-
- Newbie
- Posts: 1
- Joined: Wed Jun 06, 2018 4:10 pm
- 6
- Current bike(s): 2005 Vstar 1100, 2005 Kawasaki VN2000, and possibly a 1987 Kawasaki Voyager VII
- Has liked: 0
- Been liked: 0
1987 Voyager VII
Hello new to the Voyagers.Looking at buying a 1987 Voyager this afternoon.It has 26k miles.And I know it isn't charging.But for the condition and price not bad.My question is this.What is considered a lot of miles on the engine? And any other thing's I should look for? Thanks
-
- Cruiser
- Posts: 99
- Joined: Fri Aug 07, 2015 1:35 am
- 9
- Current bike(s): 2001 voyager
- Location: Long Lake, Minn.
- Has liked: 0
- Been liked: 0
-
- King of the Road
- Posts: 2036
- Joined: Sat Jan 22, 2011 10:08 pm
- 14
- Current bike(s): '99 Kawasaki Voyager 1200
1958 Cushman Eagle restoration has been finished,and have put 4050 miles on her! - Location: Orrville,Ohio
- Has liked: 893 times
- Been liked: 315 times
Re: 1987 Voyager VII
You should look at the number on the ignitor and see if it has 1248 on it,if not you should update it soon,the earlier one could cause a broken starter chain if you try to start it with a low battery.
Check the ignition switch harness to see if it is tightened at the steering head,which can cause broken wires in it.
Check the steering head bearings to see if they are loose.
All these can be researched on this very informative forum.
You will find several on this forum that have gotten over 200,000 miles on these engines with minimal maintenance.
I put 52,500 on my bike since I got it and the only work I have done on the engine is 4,000 mile oil and filter changes,yearly air filter service,one plug change and one carb synch
Check the ignition switch harness to see if it is tightened at the steering head,which can cause broken wires in it.
Check the steering head bearings to see if they are loose.
All these can be researched on this very informative forum.
You will find several on this forum that have gotten over 200,000 miles on these engines with minimal maintenance.

I put 52,500 on my bike since I got it and the only work I have done on the engine is 4,000 mile oil and filter changes,yearly air filter service,one plug change and one carb synch

'99 Voyager VXII,'58 Cushman Eagle
-
- Elite Tourer
- Posts: 820
- Joined: Mon Aug 19, 2013 6:08 am
- 11
- Current bike(s): 2003 1200
- Location: Eden Prairie, MN
- Has liked: 1 time
- Been liked: 3 times
Re: 1987 Voyager VII
These bikes don't cost much, I'd get a newer year and not worry about any problems
- Nails
- King of the Road
- Posts: 1831
- Joined: Thu Feb 16, 2017 4:37 pm
- 8
- Current bike(s): '97 XII
'00 XT350
'85 KLR 250
'82 Silverwing Sushiguzzi - Location: New Mexico Rockies
- Has liked: 241 times
- Been liked: 624 times
Re: 1987 Voyager VII
I'd recommend a special effort to confirm that 26K isn't really 126K. I bought one like that, but I'm still not sure.
One advantage of a newer one is that the rubber and plastic bits might not be so rotten. Was it stored indoors? Have parts (like on the carburetor) gotten a steady diet of leaked oil?
One advantage of a newer one is that the rubber and plastic bits might not be so rotten. Was it stored indoors? Have parts (like on the carburetor) gotten a steady diet of leaked oil?
--
Nails
Nails