I have a Markland backrest that is loose on the mount. I am curious if anyone has knowledge of how the pad is connected to the support.
Have you had one apart? 'm hoping there are some kind of stud and nut inside. Before I take the bottom seam apart to see I thought I'd ask here.[video]https://i.imgur.com/BourZH1.mp4[/video]
Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Markland Backrest Repair
Moderators: the2knights, Highway Rider
-
VoyKimmer
- Grand Tourer
- Posts: 533
- Joined: Mon Mar 03, 2008 12:47 am
- 17
- Current bike(s): 2002 Voyager XII
1996 Voyager XII - Location: Gurnee, Illinois
- Has liked: 0
- Been liked: 106 times
Re: Markland Backrest Repair
Take the locknut and bolt out and the bracket is attached with Phillips screws to the backrest.
-
Van Voyager
- Grand Tourer
- Posts: 446
- Joined: Wed Aug 30, 2017 8:01 am
- 7
- Current bike(s): 1986 Kawasaki ZN1300 Voyager
- Has liked: 51 times
- Been liked: 44 times
Re: Markland Backrest Repair
Yep, just tightened mine up in the last month or so.VoyKimmer wrote:Take the locknut and bolt out and the bracket is attached with Phillips screws to the backrest.
-
ffltstn
- Streetster
- Posts: 22
- Joined: Fri Mar 07, 2008 5:00 pm
- 17
- Current bike(s): '95 Voyager
'82 KZ1000J - Location: Orlando Fl.
- Has liked: 0
- Been liked: 0
Re: Markland Backrest Repair
Be great if it was that easy. I looked to do that first. The studs are either pressed in or welded. They are smooth, no screw head.
That's why I was hoping they had nuts on the inside.
That's why I was hoping they had nuts on the inside.
Ken In Orlando Fl.
'95 Voyager
'82 KZ1000J
'95 Voyager
'82 KZ1000J