Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!

Copper head gasket

This is for general posts and questions concerning only the Voyager XII (1200cc, Four-cylinder) Years 1986 thru 2003.

Moderators: the2knights, Highway Rider

Post Reply
triton28
King of the Road
King of the Road
Posts: 1028
Joined: Fri Aug 23, 2013 1:32 am
11
Current bike(s): 1987 ZG-1200 B1
1987 ZG-1200 B1
1990 ZG-1200 B4
Location: Nova Scotia Canada
Has liked: 117 times
Been liked: 290 times

Copper head gasket

Post by triton28 »

Has anyone used a copper head gasket? Apart from the obvious difference of being .022" thicker, possibly contributing to a very minor decrease in compression, are there any "known instances" of it causing any problems?
We used to re-use the old British copper head gaskets by heating them to a dull red and then quenching in water. They became very pliable and entirely re-useable.
I was thinking that the copper would adapt to any irregularities better than the .010" aluminium gasket.
Anyhow, just a thought as the OEM is very thin, and is $$$$$$
Dave
voyager55
Elite Tourer
Elite Tourer
Posts: 820
Joined: Mon Aug 19, 2013 6:08 am
11
Current bike(s): 2003 1200
Location: Eden Prairie, MN
Has liked: 1 time
Been liked: 3 times

Re: Copper head gasket

Post by voyager55 »

Never heard of anyone needing to replace it
User avatar
Chris near Kansas City
Elite Tourer
Elite Tourer
Posts: 645
Joined: Mon Feb 18, 2008 3:01 am
17
Location: Do I have to spell it out for you?
Has liked: 0
Been liked: 1 time

Re: Copper head gasket

Post by Chris near Kansas City »

Like voy55 said, rare that you'd need to replace it. But if you do, or are working on a motor and have need to get a new one, I'd go with the original Kawasaki one.
"You only live twice, or so it seems. One life for yourself and one for your dreams...." Nancy Sinatra

"If a man made it, a man can fix it." - Steve in Sunny Fla
Post Reply

Return to “General - Voyager XII (1200 Four)”