Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
OK it has been said that it can be difficult to seat the bead of a car tire on a motorcycle rim. Now that being said I was wondering just how hard it...
Last post
I couldn't even get mine to seat, I can only imagine how hard it is to remove.
So, looking at seat cover options.
I've read that the airhawk covers are good, if those are the best option what one fits the Voyager the best out of...
Where do you store your spare cable that is isn't in your way all the time. I slid mine down the frame on the left side under the false tank, wrapped...
Last post
quote: My front fender emblem was loose, thought the wind tore it off until I found the crimp. 3/4th's is gone. Don't know what would possess some...
Hello.
I currently ride a 1989 PC 800 and love it, but am considering the voyager so my wife can join me 2 up. I am thinking it will be a more...
Last post
Doug, you hit the nail on the head! That is the work of Gene, beautiful craftsmanship and the time to polish these to such luster is defiantly worth...
I'm trying to hook up light connection for my new trailer. I bought the adapter for the separate brake/turn signal lights. I found that the blue wire...
Last post
Doug Divine suggested I get in touch with Carl Leo in Florida and he walked me through troubleshooting the problem. Long story short, after...
Has anyone adjusted the gear shift linkage? Mine seems to have some play in it. Do the rod ball ends come off easily or would I need a special tool?...
Last post
Parts diagram shows no bushing, Ball is pressed into the linkage. I would think linkage on ebay with low low miles may help
I installed a new HARTCO seat on my 2000. Initial thoughts, I'm impressed. Mark really worked with me in understanding what I needed. He made it low...
Last post
I'm aware and this riders inseam same and weight was close
Is this warm enough? The bike rarely goes above this temp. I took it apart a couple weeks ago to check the ground to the temp sensor and the previous...
Last post
Mine usually runs at the same point. The electric fan turns on at one mark higher, if I remember correctly. The fan usually turns on when in stop/go...
If one wants to see what a Voyager XII would look like with 2 trunks, go to :Craigslist-Oregon coast-for sale-motorcycles/scooters-by owner, look for...
Last post
Yellow and Black, yeah, visible it should be, but even better would led lights around the headlight as suggested in another post! Then, even the...
I'm a new Member, been riding bikes 40 years, (lot's of fun ,indeed!).
I recently bought a 94 Voyager XII with 42,000 miles on it....
Last post
The xii does well both in rain and on gravel roads solo or 2 up. One of the destinations we like to head out to here comes with a 10 mile stretch of...
Hi folks. I'm looking at changing my leaky o rings on the coolant header going into the engine. The specs call for four 18.54 X 2.6 mm o rings. Can i...
Last post
OK , got the picture. I also sent Carl a word and he confirmed.
Thanks again
Jean-Pierre
I just don't know what. After riding it a few times, I've noticed some more issues. The front doesn't want to settle down, so I'm guessing a cleaning...
Last post
The wire from sensor goes to fan and if you disconnect them and touch wire from fan to the frame you are grounding it out which will turn the fan on...
I bought myself a set of Oxford Heated Grips for Christmas. I installed them a couple of weeks ago and these grips are nearly 1in shorter than the...
Last post
Thanks for all the replies. I like the idea of making another set of bar end weights that would be recessed to go over the exposed bar. Don't know it...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
