Just curious what would happen if I put my food down in some oil and the bike slipped on it`s side are the safety bars enough to keep it from getting...
Last post
Even if they do go all the way over, it's really easy to bring them up to the normal down point. Then plant your ass on the seat, grab the handlebars...
The emblem at the front of my fender is missing I doubt they are available for any reasonable price so was thinking of cutting a Voyager sticker or...
Last post
You may want to check sites like eBay - sometimes old emblems and badges turn up there. Failing that, like you said a die cut logo sticker could work...
Recently picked up a small project 1996 xii Memorial Day weekend for 750 bones, had a fuel leak issue and some fire damage to wiring on left hand...
Last post
Thanks Dave, got my parts in yesterday. New seal, and some scotch brite to clean the piston and bore and no more leak. Wife and I put 50 miles on it...
So I've discovered that my spark plug caps are barely sitting on the plugs, not snapping on. The least little wiggle and they slide right off (number...
Last post
It seems you fixed your issue, but I ran into a similar problem with one of my Vulcans. The little 'torsion bar' (for lack of a better term) spring...
I'm a new owner of Voyager 1200 2002 model.
I've been searching for owners manual, but just cant find it. Any tips ?
Regards
Maggi
Reykjavík Iceland
Last post
Here is a link to an Owners Manual.
NOTE: the rear tyre size listed in the specifications, page 14, is incorrect. The correct rim size is 15 , NOT 16...
Good morning folks, I noticed on my new Me 1992 voyager that I had a slight stumble to it, I started checking the plug wires in the resistors and the...
Last post
Looking back ,was that a good idea :hmm:
Oh yeah. She got real friendly.
I used to have lots of back problems in my early 20s, then in my mid-20s...
Good morning folks, I noticed on my new Me 1992 voyager that I had a slight stumble to it, I started checking the plug wires in the resistors and the...
Last summer, just prior to me getting an arthritic knee (long story, got it after taking antibiotics for a month for a cellulitis infection of the...
Last post
I'm also looking to downsize, like maybe an NC750 -- but I haven't even sat on one yet. I had time to kill in Albuquerque a few weeks ago and checked...
I just traded my 94 Virago 1100 for a 96 Voyager 1200 XII and took it directly to my shop to have it given a go-over. At 94k miles I thought it would...
Last post
Well, a new clutch setup and stronger spring did the trick. It shifts well now, no slipping, and downshifts into first without stalling. It's SO good...
Just wanted to see if everyone usually runs 93 thru there voyagers. The guy I bought mine from was running 93 but you can’t buy ethanol free in 93 ,...
Last post
Thanks everyone for the advice, I’m going to switch to 87 ethanol free and see how it goes, really appreciate all the advice I get on this forum.
...last weekend, in my panic to try to get the bike home under it's own power, i forgot to latch down my saddlebag lid and it skidded down the road a...
Last post
AFAIK the right side lids are still available. last I knew of Carl Leo still had some, and I see them on eBay occasionally. The left side ones,...
Get Ready to Turn Heads with the Moister Than an Oyster Shirt
Fashion is more than just fabric—it’s a way to express personality, confidence, and...
Last post
I found out that moving does not mean just coasting. (I was trying to bump-start down a hill that wasn't very steep. It's also good to check the kill...
I read through the tech write up and I believe I can handle this rebuild fairly easily, however I have a few questions. Does the progressive swap out...
Before I try to buy and throw a speedo gear on the front wheel is there anywhere else I should check on this bike? I'm new to the voyager series and...
Last post
I agree! I couldn't have done it without everyone here's collective knowledge. I am so glad I stumbled across this forum and all the willing to help...
Hey guys, I have the wheels off since I got some new tires, and I was going to do a thorough cleaning of the rims before I put them back on. There's...
Last post
Have you thought about powder coating. Lots of colors to choose from, looks nicer, lasts way longer, easier to clean and in my experience cheap to...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
