Hello everyone! As of today, we have 90 registered! That's going to be a great turn out!
Just a reminder that rally registration closes on May 9 so that we can place our t-shirt order for the rally.
If you are coming, but have not sent in your registration, do it TODAY or TOMORROW!
After that, we will not accept any orders for t-shirts. We order a few extra of the most common sizes for the rally. You can only get what is available.
Have you all made your hotel reservations? If not, do it NOW! If our blocked rooms are full at Laquinta Inn, you'll have to find other lodging.
See you all soon!
Got a tech tip for Voyager 12's from your personal experiences, or one complete with pictures and instructions, here's where to post it. You can also ask about tips or procedures here.
I've got an ATV jack/lift that I use with my KLR. I want to use it on the Voyager. Does anyone know where the center of weight is on the bike? If...
Last post
Years ago someone on this forum was manufacturing the lift adaptors that bolt to an ATV lift. They work well and don't crush the inner exhaust pipes....
So, I recently bought a 96 XII that had been disassembled for about a year to replace carbs. I've since cleaned and reinstalled the new carbs and put...
Last post
Thanks for the tips! I'll hopefully have a few chances to try some of them this week. I'll be sure and post any updates here.
Good evening, just looking at 2 different sets of carbs I have, 1 from a Canadian bike, the other from a US be ke. The numbers stamped on the side of...
Last post
Hello Jeff from Nova Scotia;
The carburetors I have in my collection are both the V371 and V372 models. There are no discernible differences in the...
My bike will probably have about 86,000 miles on it going into
With that in mind,should I be looking at water pump overhaul,alternator bearing...
Last post
Loren,
I have almost the same miles on my 02. Going to Summersville my output bearing failed and Carl replaced the transmission Assy . My feeling is...
I have an 86 Voyager. And my headlamp warning (idiot light) bulb came on which tells me that I need to replace my headlamp. What is the trick to this...
Last post
... it's immediate, just the act of hitting the starter can do it, it doesn't need to be running...
Best to Ya!!!
I have a '93 with 45000 miles on it, and after reading about lifter noise and cam chain noise I think I have both. I am familiar with the lifter, or...
Last post
.. as I'm apt to say... I do NOTHING quite well!!!! GBG Best
to ya!!!
I'll just run it a while longer and see how it goes
Just got a 2000 12 and found 3 fairing screw locations to be broken. They'd been glued before. I'd like to know what type of plastic is the fairing...
Last post
The lower holes on the lower fairing that screw fast to the crash bars that brake, I have a fix for them .
It is a insert and a stainless steel screw...
New to forum but not new to motorcycles! I just acquired a 2004 XII that had been sitting for several years...about 18K on the clock. It's pulling a...
Last post
Great to see somebody doing mods and succeeding! awezome!
Hello im am recently a new owner to a 1986 kawasaki voyager 1200 xii ive been working out all the corks due to the bike sitting and not being ridden...
Last post
Stargent he can still download everything he needs from my link in my signature. No charge.
I’ve heard about people replacing the original air suspension on the front forks with regular.
So just wanted to ask what I would need and...
Last post
That’s interesting about the race tech springs. But I don’t have that money to spend right now either.
A previous owner had already replaced the rear...
I did this after I came back from a ride today and discovered the right rear speaker was being held on by only one rubber mount. I looked at the fix...
I have 86 Voyager 1200. Last year it started missing when hitting bumps, and eventually died when I got in the driveway. Tried to restart it with no...
Last post
Touching the handle bar with a wrench should not have stopped the bike .
My Guess is you have a short and blew a fuse.
Have 95 1200 b9 . Sat for 4 months took it out rode fine backed it in drive heard a clicking noise from the rear. Changed gear oil , no noise in 1-2...
Last post
Have you started the bike and gone through the gears while on the center stand? If so can you hear the clicking? Could be something in the rear...
OK, so I have a set of driver floorboards I just installed that I got from another AVAer. I have the PDF from the tech area on the installation...
Last post
It seems like you'd have to have a pretty radical bend at the ankle to get your toe over the top of the shifter to downshift. Not only won't my boots...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
