Got a tech tip for Voyager 12's from your personal experiences, or one complete with pictures and instructions, here's where to post it. You can also ask about tips or procedures here.
Have been working on putting my motor back together. Going through and cleaning up all the parts for reassembly and noticed that the oil pressure...
Last post
Well I think I found it. It is actually in the Generator diagram and listed as 26001 26001-1761 HARNESS. I zoomed in on it and looks like mine. They...
Well I figured out how to get my battery nice and charged up over the past few weeks. Just buy another battery! Had been having some issues with the...
Last post
Already have one of the voltmeters on the bike and it stays in the green while the bikes running. Have never noticed it dropping down under green...
Picked up a 1992 with 75k end of last season that ran great. Then the headlight faded out and the cold weather brought on the leaky manifold. I think...
Last post
That's what is so funny. None of the marker lights are working EXCEPT for the trunk lights. They work as both marker and turn/brake. Forward, only...
Just rebuilt the clutch and now the bike will not start. Drove in the garage, did the rebuilt which took to weeks, because i found broken springs and...
Wondering how difficult it is to replace the clutch springs? Special tools needed?
Is it a dealer job, Or something a average skilled person could...
Last post
Very simple job, Just remove cover (drain oil first) unscrew springs and re-install new springs, very inexpensive. You will need a new gasket and the...
The topic of 'triangle of lights', and 'headlight modulators' came up in another MC forum, and I did a little searching for information. Here is what...
Last post
OK, so I got my hitch and H/F box trailer. I need to mount a generator and run some wiring for the train lights, air compressor for the train horns...
:help: I need to know the Allen bolt. Sizes for the rear rotor
and the one for the bottom of the forks (to remove the inner forks to get at the...
Last post
Hey Vinny, had to go out to the shop but the rear rotor allen is 8mm and the bottom of the fork is 6mm. Make sure the 6mm is long and in great shape...
Hey all,
Former owner had the rear rack mounted speakers disconnected when he installed a JVC Radio to replace the stock one that was shot. The rear...
Last post
It should be loomed with the wiring from the bike that connects to the rear passenger audio controls. One white and one green connector.
Anybody got pictures of how they have there GPS mounted on the 1200. I am trying to decide what mount to buy for my garmin nuvi 50.
Last post
I mounted mine on top of the cruise control and drilled a hole to hold the mounting screw. I ran the wires from the GPS unit under the cruise control...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
